SIEMENS 599-03167 Building Technology "1""N/O VLV BODY

"1""N/O VLV BODY

The Siemens 599-03167 Building Technology "1""N/O VLV BODY is a part of the Building Technology family. The following outlines the type of components included.

The Siemens 599-03167 Building Technology "1""N/O VLV Body is a genuine OEM part. The Genuine OEM tag guarantees that the part was engineered to Siemens' specifications resulting in the highest performance with superior quality. You can be sure that this part will function properly and is designed to last.

# VLV BODY 1"" N/O

Compact but powerful. The 1" N/O Multiport Valve Body with built-in diaphragm seal and integrated load monitoring is Space-saving and robust. With its fast opening and switching capability, it provides maximize flow control for the most challenging applications.

The VLV series of valves is designed for use on 1"" MSS 2001A and B and 3202C and D Air Conditioning and Heating (AHU) systems. The valve is a plug-in design with both female or plug-tapped connections. The VLV features a brass body, NBR molded diaphragm, and FKM O-rings.

The 1/2 HP SITER 2F1-S is a direct plunger, normally closed (N/O)solenoid valve with plastic housing. Requires 4.5 VDC at 6 VA maximum to actuate solenoid. Diaphragm design."

The 599-03167 occurs in products listed below:

Applications Requiring Non-Operating Valves - Non-operating valves are used for installations which do not require the valve to operate. The non-operating valves are rated for steam pressures up to 85 PSIG (0.609 bar).

Inline vertical limit switch that mounts in the center of a valve body and connects to the valve stem, plunger or spool of a needle valve. It is designed for use with gas and oil burners and other applications where a piece of equipment downstream from the turbine needs to shut off if the turbine gets too hot. The switch contacts close on rising temperatures and opens when lower temperatures are present.

The 599-03167-00 is a combined solid state device.

A valve used to control water, gas, steam, hydraulics, refrigerants and air pressure. It is used in plumbing fixtures to control the flow of water or incompressible fluids, and in machines that require controlled flows for production or process reasons. The body is a die forged brass part rigidly attached to a steel cap under a spring loaded bonnet.

A VFC solenoid valve is used for flow control. It contains a feedback loop and a voltage-actuated, normally closed (NC) electromagnetically activated spool valve. The electromagnet uses electric current to attract the core of the VFC solenoid valve and then moves it into the open position against spring tension.