SIEMENS QAA2280.EWSC Building Technology 55-95F TEMP SENSOR ANALOG RES

55-95F TEMP SENSOR ANALOG RES

This is a SIEMENS QAA2280.EWSC Building Technology 55-95F TEMP SENSOR ANALOG RES

The QAA2280.EW Sensor Interface converts the output of the sensor into an ANALOG RES signal. It is optimized for use with the DS35F and DS70F series of gas sensors. This device can be used with any voltage from 5V to 40V. It features a large, self-shielded HEXNET RJ45 connector that helps protect the wiring from electromagnetic interference (EMI).

The Siemens QAA2280.EWSC is a cost-effective, RS485-based indoor temperature sensor with an extended temperature range from 55F to 95F. This sensor is extremely well suited for applications where comprehensive temperature information is required at a variety of locations and at lower operating costs than an equivalent digital system.

The Siemens QAA2280.EWSC Building Technology Digital Thermostat Accessory is a temperature sensor designed for the QAA212B. This accessory features multi-voltage for higher voltage applications and has an optimal range of 55-95F (12.8-35C).

The Siemens QAA2280.EWSC sensor has an analog signal, and has a temperature range of 55°F to 95°F. It measures temperature.

The QAA2280 is an Analog Resistor based on Semitec T104 and QAA225x series. The IC can be used to monitor the room temperature or control the heating/cooling equipment.

This Temperature Sensor features a 1-wire pluggable cable, an NTC thermistor, and is made of Plastic. It has 4.75 FT Cable Length. It is designed for use with Siemens Building Technology. The Temperature Sensor has a 0 to 400F Temperature Range.