Spirax-Sarco 50930 "FT-75 3/4"" F & T TRAP 75#"

"FT-75 3/4"" F & T TRAP 75#"

The FT-75 is the first 3/4"" F & T trap in our Spirax-Sarco family of traps and probably the smallest trap in it's class. The FT-75 has four waterway outlets, one at the top, two side outlets and one bottom outlet. It is available in an e-coat version and a galvanized version.

The FT-75 (3/4" F & T) Trap is a second and final stage trap that will be installed after the pump discharge piping to reduce the suction pressure to maintain higher pumping efficiency.

Our F & T TRAP has been designed to be an economical solution for all our customers requiring a larger trap than the FT-50. It is manufactured from heavy gauge tubing and it features an end cap of extra material which provides strength and security. A large galvanized steel top handle enables the trap to be handled with ease when full. The FT-75 can be used for all waste, sewage and drainage applications.

Spirax-Sarco's FT-75 is a 3/4" female threaded full port trap with a 75 pound working capacity. It has a snap-in joint that, when combined with the cover assembly, ensures positive seal against pouring water and insects. The anti-siphoning vent will allow you to keep your vertical drain line flowing properly for years to come.

The FT 75 is a 3/4" fixed and total return oil-filled trap with 1/2"" NPT drain connections, quick connect unions (QCUs) and cast iron body.

The Spirax-Sarco FT-75 3/4" Flexible Trap uses an innovative design that allows you to connect air ducts from the fan directly to the trap via a socket and C-ring. This connection avoids costly construction and leakage failures, by eliminating the need for flexible connections to be made within the ceiling.

The FT-75 SINKING TRAP offers almost a 100% recovery of most drowner birds. An extraordinary "readily available source of food" for waterfowl, combining the finest leatherback style trap with a sinking float to make it a perfect combination for relatively shallow feeding areas such as ponds and flooded fields.