Spirax-Sarco 64162 "B1H-125 3/4"" 125# Bucket Trap"

"B1H-125 3/4"" 125# Bucket Trap"

No job too big or small for the Spirax-Sarco 64162 "B1H-125 3/4"" 125# Bucket Trap". This product is durable and holds up against high usage. This product is made to a high standard and made from quality material.

The Spirax-Sarco 64162 "B1H-125 3/4"" 125# Bucket Trap" is used for commercial or residential applications. It gives off a 1 1/2"" inlet x 3 1/4"" outlet size and has a vertical height of 19". It comes with a bucket trap that's 15/16" piggy back union, and it fits pipes with an I.D. of 12.5mm to 15mm

Keep water away from your home when you install the Spirax-Sarco 64162 "B1H-125 3/4"" 125# Bucket Trap". This trap extends 2" below the line and has a 1/4" NPT outlet roughened for hard pipe thread (NPSM) that will accommodate a standard garden hose.

The B1H-125 3/4"" 125# Bucket Trap is suitable for both gravity and vacuum applications. This trap is used to connect PXF, PXMB, HF-160, HF-80, ENV, ENVB, HDNU and CA60 Cast Iron Sanitary Valves to plumbed equipment being drained into a bucket. The familiar fluid design on the trap wall indicates the level of liquid inside the bucket.

This Spirax-Sarcom® B1H-125 3/4" 125# Bucket Trap is designed with a B14 bottom outlet to provide maximum capacity, and a durable high-performance polypropylene construction that withstands chemicals.

The B1H-125 Bucket Trap is designed for water service to provide a partial seal and protect cold water storage. It is recommended for hydronic heating, chilled water service or use in domestic hot water heating systems. The B1H-125 Bucket Trap is constructed of brass with a nickel chromium plating and a flexible polymer top cover. The polypropylene joint gasket allows the trap to provide a partial seal on vertical connections. Each joint gasket has four holes for fastening the trap with either wood screws or ½"" diameter x 1/4" long pop rivets (2 rivets are included per

The Spirax-Sarco 2? 32 mm X 3/4? 125# Bucket Trap is a self-priming bucket trap for drainage of gravity and pressure supply lines. The structure is a superior model, built to highest quality standards. The product is packaged with a twin isolation valve.