Johnson Controls P70AA-147C SPST PRESSURE CONTROL

SPST PRESSURE CONTROL

Johnson Controls Pressure Control, 1/4" NPT, 0-100 psi, SPST.

The Johnson Controls P70AA-147C, SPST Pressure Control is a pressure switch with a 0.25 in NPT connection, 1/2 HP motor and pressure range of 10 to 65 psi. It also has a motor protection bypass, 2-wire, 120/240 VAC power supply and comes with stainless steel body.

The Johnson P70AA-147C pressure control is designed for installation in the suction line of a heat pump or air conditioning system. The slide valve opens when the pressure rises above set point and closes when the pressure returns to normal, shutting off the air conditioning compressor or water source from the heat pump. The Johnson Controls P70AA-147C is a direct replacement for the Lennox X8084A and compatible with other manufacturers’ applications as well.

Johnson Controls P70AA-147C SPST PRESSURE CONTROL

The Johnson Controls P70AA-147C SPST PRESSURE CONTROL is a switch that monitors pressure. The switch has one input and one output port, and it is designed to open when the pressure exceeds the preset limit. It has a wide variety of uses depending on your application and the type of pressure you are monitoring. A pneumatic pressure switch like this can be used in applications such as refrigeration systems or air conditioning systems, but it can also be used for many other applications, such as controlling water or liquid flow, controlling solenoid valves, and much more.

The Johnson Controls P70AA-147C is an electro-pneumatic diaphragm pressure control that provides a proportional output of 3.5 to 15 psig (0.2 to 1 bar) in response to input air pressure of up to 70 psig (4 bar). The EN3 process connection allows mounting on the left or right side of the valve. This product is ideal for applications that require either manual or automatic operation, and can be used for air/gas, air/water and water/air service combinations.

Johnson Controls P70AA-147C SPST PRESSURE CONTROL - Pneumatic Pressure Controller provides a portable pressure control solution for industrial applications. This device is available in inch, millimeter, and bar sizes with four models including single-stage, two-stage, three stage, and four stage for your specific application needs.

THIS PRESSURE CONTROL IS MADE BY JOHNSON CONTROLS, AND IS ONE OF THE BEST YOU CAN BUY. THERE ARE MANY DIFFERENT TYPES OF PRESSURE CONTROLS, AND THIS ONE WORKS BY REDUCING THE AMOUNT OF CO2 THAT GOES INTO YOUR CARBON FILTER. IT IS PERFECT FOR THE SMALLER CARBONS THAT ARE USED IN HOUSEHOLD AIR PURIFIERS.

A one-piece pressure control, the Johnson Controls P70AA-147C is UL/CSA listed and comes in an NEMA 4X enclosure. This pressure control is a direct replacement for existing actuators requiring a 70 to 140 PSI range and can be used with either 28 VDC or 120 VAC power.