Taco 35745 2 Zone Switching Relay w/ Priority

2 ZONE SWITCHING RELAY W/ PRIORITY

The Taco 2 Zone Switching Relay W/ Priority is a 2 zone switching relay. Can be used to trigger devices such as solenoids, pumps, servos or other solid-state switches that require a low voltage signal for activation. The Taco 2 Zone Switching Relay W/ Priority can use traditional RCA cable, or the included 25ft of Cat5e Cable with hand-terminals.

Taco 2 zone switching relay w/ Priority. ORDERING OPTIONS 2 zone switching relay w/ priority (35745) The Taco PG2 Relay with Priority is a heavy duty, custom designed switching relay that allows the user to select a priority circuit from two external circuits.

Taco 2 Zone Switching Relay w/ Priority is a two zone switching relay that provides a safety measure for snow throwers, lawn tractors, golf carts and other applications. It comes with a priority feature that lets the snow thrower or lawn tractor always run first. The relay does not allow the second zone (mower) to run until the snow thrower or lawn tractor stops. Additional features include Temperature compensated, 10 Amps max AC Load per pole, Normally Open (NO) Normally

The Taco 2 Zone Switching Relay w/ Priority is a fast and economical way to operate high-current loads within a circuit. Typically used to switch low-cost devices in 2 zone applications, this relay has 2 independent sets of contacts designed for 240V applications using 12 or 24 volts DC. It features a Priority feature that will activate an auxiliary contact group when the primary contacts are energized. The Priority feature will also release the auxiliary contacts when the primary are de-energized. #

Taco`s 2 Zone Switching Relay with Priority is designed to help control 2 independent heating applications. The relay features a 1.5 Amp motor contactor, a Class H trip-free mechanism, and 2 normally closed relay contacts on an SPDT switch. This relay works with Taco`s EZ200, EZ300, EZ4 and EZ3 timers. Also works with the newer Silverado products

Taco switches, relays and driving circuits are designed to operate as engine controls. Features include UL-approved 2-zone switching relay with priority,  Maximum switching capacity of 5 amps, Comes with one SPDT relay that switches up to 5 amps, Pins are numbered for easy identification, Amber LED lights confirm when output is ON.

Taco’s 2 zone switching relay, provides a two-zone, proportional control of high voltage electrical devices. The switch automatically moves from position 1 to 2 providing priority to Zone 2 when required. The switch is a two-circuit, power-indicating device with grounded NO (Normally Open) & NC (Normally Closed) circuits.