STARTECH.COM USB312SAT3CB CONNECT A 2.5INCH SATA SSD/HDD TO YOUR COMPUTER USING THIS USB 3.1 GEN 2 (10 GBP

CONNECT A 2.5INCH SATA SSD/HDD TO YOUR COMPUTER USING THIS USB 3.1 GEN 2 (10 GBP

Using this USB 3.1 Gen 2 (10 Gbps) adapter from StarTech, you can add a high capacity 2.5 inch SATA SSD/HDD to your computer without having to open the case or use a computer internals card. It also supports UASP for high performance and low processor utilization.

Our USB3-312SAT3CB is the perfect solution for anyone that needs to connect a 2.5in SATA SSD/HDD to a computer with USB 3.1 Gen2 (10 Gbit/s) support. Utilizing the latest in SATA NVMe drive technology, this adapter pushes read and write speeds of up to 5 Gbps and 480 Mb/s respectively - significantly faster than USB 3.0 and other interfaces.

The Startech.com USB312SAT3CB USB-C to SATA Adapter Cable is a USB 3.1 Gen 2, 10 Gb/s cable that allows you to connect a 2.5" SATA SSD or hard drive to your computer using the USB Type-C port on your computer. This cable can be used as an alternative for the internal SATA connector, allowing you to install HDDs or create a hot-swap drive bay with more ease than and internal connector.

The StarTech.com USB3S2SAT25CB is a USB 3.1 Gen 2 (10 Gbps) to SATA 6 Gbps cable adapter that enables you to connect a 2.5-inch SATA drive to your computer through an available USB 3.1 port. This adapter lets you access the SATA drive from your computer, through the native USB interface, without needing to open your case and install an additional storage controller card. Designed for convenience, this compact and lightweight adapter is powered directly from the USB bus and does not require a dedicated power supply.

The Startech.com 2.5-inch USB 3.1 Gen 2 (10 Gbps) SSD/HDD enclosure supports all 2.5" Serial-ATA/SATA I/II/III SSD/HDDs up to 480GB for direct connection to a computer's USB 3.1 Gen2 port (USB-C connector) via an included 2.5" mounting bracket. The enclosure is compatible with any device you already have that connects to a computer using a standard SATA data cable, making it an ideal solution for migrating existing data from a hard drive or solid state drive in another computer into your

The StarTech 3.1 channel SATA III cable is perfect for connecting a 2.5-inch SATA SSD or hard drive to your computer via USB 3.1 Gen2 at speeds of up to 10 Gbps. The transfer speed is faster than USB 3.0, and more than twice the maximum throughput of USB 2.0, making it ideal for backing up large volumes of data or transferring HD media files from an external source. This USB-powered cable eliminates the need for an external power supply, and the wide data transfer pipes support fast charging (up to 5V/3A) when powering mobile devices,

The StarTech.com USB3S2SAT3CB 2.5-Inch SATA III to SATA SSD/HDD Solid State Drive Converter Enclosure is an internal hard disk adapter for any Serial ATA (SATA) solid state drive or hard disk drive. It connects via a USB 3.1 Gen 2 Type-C (10GBASE-T) connector to an available expansion slot in your computer, and allows you to create a data connection between the internal drives installed in the StarTech.com enclosure and your computer without opening the case of the computer.