Supco SLP75100 75#CO 100#CI LOW PRESS SWITCH 75#CO 100#CI LOW PRESS SWITCH

75#CO 100#CI LOW PRESS SWITCH

75#CO 100#CI LOW PRESS SWITCH, Provides coverage for service tools and generators. Protects against motor burnout, 120/240VAC, 60HZ, single phase, with 15 Amp blade type NEMA L14-30R receptacle. Tamper resistant locking cover screws prevent tampering and unauthorized removal of switches from disconnecting the load from power.

Make sure your electrical appliances and other equipment that rely on a low pressure switch work properly with this 75#CO 100#CI LOW PRESS SWITCH from Supco. This standard low switch is certified at 100% ambient and has a minimum burst rating of 100# psi. Using the internal lever, you can adjust the setting pressure to whatever you need.

The Supco SLP75100 75#CO 100#CI LOW PRESS SWITCH connects to the bottom air outlet of your delivery system and attaches to the transmitter of a Supco telephone display. When your CO2 tank runs low, the low pres

The SLP75100 is a latching normally open (NO) low pressure switch rated for 75/100 PSI.

When you're experiencing an electrical outage, a Supco SLP75100 low pressure switch will automatically turn your hot water heater off to prevent damage. This 75 pounds per square inch (PSI) and 100 degrees Celsius (EC) switch offers both short and long-term protection for your 120-volt electrical heating system.

Low pressure switch uses a thermally responsive bi-metal strip to interrupt the current at low tank pressure. The switch is self-resetting and designed for use with refrigeration systems that use 100 psi of refrigerant

The SLP75100 is a 240V Electromechanical low pressure switch for oil, gas or air that detects low pressure and automatically shuts down the system to prevent fire, explosion or to protect from freezing. The SLP75100 is fully adjustable at the factory with a range of 90-150psi. This switch can also be adjusted to meet requirements from 50-500 psi.