Field Controls 1185 POWER VENTER 416,000 BTU/HR MAX--2.

POWER VENTER 416,000 BTU/HR MAX--2.

The Field Controls 1185 POWER VENTER 416,000 BTU/HR MAX--2. is an upscale forced-air heater with an air-flow capacity of 416,000 Btuh at 122.3 CFM. Features include a 420,000 Btuh/hr Electric Ignition unit, a polyurethane foam insulated cabinet with composite wood doors, a hardware kit to enable installation on walls or ceilings, a pilot light that automatically adjusts for altitude and changes in barometric pressure--generated by a microprocessor-controlled system--high/low oxygen sensor, ignition assembly with and without flame failure protection

The Power Venter 416,000 BTU/HR MAX--2 is an efficient, mid-size venter for farm and garden center use. It draws 8750 cubic feet of air per minute (CFM) at 6 inches water pressure (WPG) at 100 feet of vent pipe for excellent air movement when set to the High Venting position. This venter has two heating elements; a top element rated 67,500 BTU/hr, and a bottom element rated 72,000 BTU/hr. The power vented unit features brass connectors, multiple sizing positions with strong spring assist, an 8-

The POWER VENTER 416,000 BTU/HR MAX--2 unit is designed for central heating and cooling systems. It has a simple two stage design with a separate outdoor fan-compressor compartment. The unit can be vented or installed in ducted applications, complete with a spark arrestor for use in gas-fired installations with open flues.

Our 1185 POWER VENTER can vent two (2) furnaces or one (1) furnace and one (1) air conditioning unit. With a 416,000 BTU/HR MAX--2 output, you get more heat and less noise from your gas equipment. As always Field Controls power vents are made to the highest standards of quality and durability in North America.

The Field Controls 1185 Power Venter 416,000 BTU/HR MAX Dual Fuel Energy Efficient Gas / Electric Venter is designed to help contractors and DIY customers acheive the most efficiency from their heating and cooling systems.

Impeller Systems 665,000 BTU/HR MAX--1.

The Power Venter, provides climate control for your food or beverage with differential temperature zones for product and floor storage. Recirculation of product air is achieved by positive pressure, low exhaust air volume design. This unit is designed for continuous operation for up to 500 lbs. of palletized packaged products for six months without servicing. The self-contained unit contains all of the major heat transferring components and electrical equipment including a completely sealed refrigeration system.