SWITCH, PUSH-BUTTON, START/STOP for FALCON FABRICATORS - Part# 10-01-001

SWITCH, PUSH-BUTTON, START/STOP for FALCON FABRICATORS - Part# 10-01-001

This part is for use with the Falcon Fabricators Programmable CNC. This unit has a push-button start/stop and a safety interlock for hands-free operation. The power to the machine supplies this safety switch. The interlock prevents starting or stopping of the machine if anybody is near or touching the cutting accessory motors. When not in use, please make sure this push button's tab is pressed down; as it will save unnecessary wear on the button over time.

The Kentec push button start switch is perfect for use on machines that require a manual start and stop. It installs easily in minutes without tools, utilizing a simple wire and connector for easy installation. The 10-01-001 push button start switch works because it's portable, durable, and easy to install. A carrying handle makes it convenient to get from job site to job site.

This product is a push-button, switch that can be installed into or onto the front or top of an MIG welder for the purpose of starting and stopping that welder. This product is a push-button, switch that can be installed into or onto the front or top of an MIG welder for the purpose of starting and stopping that welder. This product has a maximum operating voltage of 110 VAC , AC Only , 1 HP , 7-3/4 in length x 4-5/8 in width x 2-3/8 in height.

We've included this push-button, start/stop motor switch in all our new GRS-3000 and GRS-5000 models.

This switch has many uses; it is a "run" and "start" switch for a machine, or it can be used to control lighting such as an outdoor flood light. The push-button lockouts the start button so it cannot be accidentally activated. COMMON APPLICATIONS: Fan coil assemblies, commercial dryers, and any other application that needs "ON/OFF" or "RUN/START" options.

COIN switch–activated push-button starter/stop switch. Low voltage with automatic reset. Available in 120VAC or 12VDC .

These switches are used for Falcon models B4N, C4NB, C4N, and F12. The two different options - momentary or latch-on - let you choose the button action that works best with your application.

Push-button pilot light switch provides convenience and ease of operation. Two circuit designs for peak or valley functioning. Lightweight aluminum housing, durable pilot assembly, and spring-loaded starter are further features of this switch. Initial adjustment should be made at the same time and in accordance with the instructions provided in the installation manual (Article

Switch is a compact 2- to 4-axis control system that's compatible with any of the Falcon series Spindle Motors.

The SW-300 push button start switch is an economical, reliable way to convert a twenty amp or one hundred amp single phase AC circuit into a push-button start switch.

With the largest selection of raw materials, state-of-the-art equipment, and 70 years of experience, Falcon is ready to help you engineer your next project. Whether you're looking for stainless steel or aluminum materials, or something more exotic like Titanium or Inconel, I am certain that our highly qualified staff will find the solution for you.