Johnson Controls 9028 Pneumatic Thermostat Adjustment Tool Freezer Refrigeration Kits

ALLEN HEAD ADJUSTMENT TOOL; BLUE NO

This Allen head adjustment tool is designed for Johnson controls 9028 and 9029 Accumulator Thermostats. Our professional quality adjustable tools will provide years of service. All of our tools are manufactured from high carbon steel and heat treated to ensure a lifetime of use under normal service conditions. They are accurately machined and manufactured to exact tolerances to give you confidence in their use.

One-piece pneumatic 9028 2-way adjustment tool for freezer and refrigerator thermostats. Allen head adjustment to remove and replace the spring loaded setscrews that hold the thermostat in place.

Johnson Controls 9028 Pneumatic Thermostat Adjustment Tool - Adjust thermostat on refrigeration and air conditioning units. Move cold/hot sides of device with one tool. Allen head screws into valve stem slot and valve under cap unscrews without holding wrench.

This tool is designed to fasten or remove the set screw in the type 9028 pneumatic thermostat and to make indicated adjustments when necessary. Inclusion of this tool will eliminate the use of foreign tools, that are subject to bending or breaking. This tool is made from hex steel and is chrome plated for corrosion protection. Allen head binder holes are machined into one end of the tool for easy handling and storage.

The 9028 Adjustment Tool is a nut-and-bolt wrench used to make changes in a system. Also, as a screwdriver, it has a 1-7/8" square drive handle that is 1-3/4" long. The swivel check valve on this tool makes it convenient for changing automatic defrosting systems.

It's unlikely that you will be able to remove the thermostat from the back of the freezer or refrigerator. It can usually be removed by removing the access doors on either side and then loosening the screws holding its bracket to the back wall. The Allen-head adjustment tool pictured above is a special wrench that fits most thermostats, including those used in this kit.

The Johnson Controls 9028 pneumatic thermostat adjustment tool is a compact, accurate and reliable tool that can be used for air conditioning and heating systems. The easy-to-monitor head enables easy viewing. The Johnson Controls 9028 is an essential tool for maintaining the proper temperature control in heating, ventilation and air conditioning systems.