Johnson Controls 3561 Single Temperature High Volume Output Thermostat, Direct Acting, Vertical Mounting.

DA PNEUMATIC VERTICAL MOUNT THERMOS

Direct acting, pneumatic vertical mount thermostat provides single load output to ensure high volume setting flexibility. Use with 90% AFUE, 90% AFUE and 80% AFUE furnace models. Matching, interchangeable terminals selected for quick, easy installation. Complete instructions included. Control remains accessible for diagnostics and service.

SINGLE OUTPUT, VERTICAL THERMOSWitch input range: 200PSI to 255PSIA "Two wire" pneumatic vertical thermostat for larger heating or cooling systems, as well as other applications where high volume outputs are required. The unit will cycle air from 11-54 minute periods when energized. Unit contains a built in internal delay feature for 5 minute safety protection.

Johnson Controls 3561 Single Temperature High Volume Output Thermostat, Direct Acting, Vertical Mounting. Used In: Commercial Kitchen Hoods, Grills And Food Service Applications. Stock up on Swingline staplers or collectibles from a favorite movie or TV show with the handy Swingline Stack and Store Organizer. Used In: School and Classroom, Office And Professional Workshop Applications, Under Desk Use.

This direct-acting pneumatic thermocouple is used in heating or air conditioning applications. The thermocouple can be self-contained or extended to remote locations. Your order will include the adjustable limit switch, wiring harness, installation instructions, and a technician call tag to ensure that a qualified service representative installs your new thermostat properly.

The Johnson Controls 3561 thermostat is a direct acting, vertical mount thermostat. Vertical mounting is used with any directional draft or supply table, horizontal blower, and exhaust board.

The Johnson Controls 3561 single temperature high volume output thermostat, direct acting, vertical mounting is manufactured by Johnson Controls. This product is a gas or gas-oil thermostat, which calibrates the flow of refrigerant into the compressor. A direct acting thermostat opens and closes when a specific temperature is reached. For this reason, a direct acting thermostat is normally not used when the duct system in which it will be operating discharges hot air directly onto its face. ``

Johnson Controls Dual-Element High Volume Output Thermostat is for commercial use only and has a vertical mounting style. For optimal performance, the thermostat must be mounted at approximately eye level to obtain accurate readings. If installed at lower heights, the thermostat is susceptible to false temperature readings due to the heat pattern and height it was installed at. In addition, proper installation is imperative if the thermostat is going to be using an extension wire for reach. Example: Installed in an