T&S B-6K LF *ETERNA SPINDLE KIT T&S B-6K LF *ETERNA SPINDLE KIT

T&S BRASS ETERNA SPINDLE PARTS KIT

The T&S BRASS ETERNA SPINDLE PARTS KIT includes all new parts and components for rebuilding a broken or retrofitting an old one. The kit is designed for all small, medium, large and extra large format hight-speed spindles from 0.5 to 6 axis and higher (16 mm to 230mm.) The kits include the reproductions of the original design hardware and components such as thrust bearings, collets, screws, nuts, spacers etc. Furthermore, the kits may include any additional hardware designed specifically for your spindle model to enhance performance of the rebuilt system.

T&S Brass Eterna Spindle Parts Kit includes: 1x Eterna Bronze Spindle, 1x Eterna 6mm Spindle Shaft, and 1x Slimline Drive Housing. Features of the T&S Brass Eterna include: full range of adjustment for the perfect walking action, in a light weight design and oval integrated handle for increased comfort. It has an easy-threaded, removable spool that clips on to any bass. The screw can be adjusted to accommodate a wide variety of casting weights. The T&S Brass Eterna Spindle is designed for use with all

T&S Brass Eterna Spindle Parts Kit Includes 1 N4239 Spindle Shaft, 2 KL5273 Bearings, and 2 KL5242 Caps

T&S Brass Eterna Spindle Parts Kit includes Spindle, Spindle Nut, Billet Bearing Plate, Pivot Shaft Assembly, two 1/2" Threaded Spacers, with set screws, 1/2" Lock Washer and 1/2" Nut.

This T&S Brass Eterna Spindle Parts Kit has exactly what you need to rebuild your arm with tanged bearings! The spindle is used in the TP24 Eterna arm, TP24/B Eterna S-arm, and the TP24/E Pro arm. These parts are also compatible with most other turntables that use tanged bearings.

T&S Eterna spindle parts kit, consisting of the spinning arm (worn or broken arm), needle roller bearing, washer, pinion, spring and holder are included. Each arm sold separately. You will receive a total of four arms with this purchase, and can use all four at once if you are replacing all of them.

T&S Eterna spindles are used in many of the finest tubed amplifiers, phono preamplifiers, and tonearms. The original parts used to build these fine components are no longer available. T&S Precision Tools has addressed this problem by designing and manufacturing a high precision, modern replacement for these venerable units. Our reproduction of the Eterna spindle does not require any machining to fit the new bearing races as did the original one piece assembly. All that is required is to remove the set screws from each end of your existing spindle and install our new bearings into the