REMOTE BULB TEMPERATURE CONTROLLER
Remote bulb temperature controller features a long 50 foot wire with loop to secure around light bulb power cord, Adjustable from 40F to 140F, Single pole switching with pilot lamp for on/off override.
The Honeywell Remote Bulb Temperature Controller protects valuable plants from the temperature fluctuations in your growing area by automating the ventilation system. Monitor and adjust temperatures using a large LCD display, on/off switch, and 4-button keypad. The controller is programmed with one fan for 120V applications. Includes an integrated 24 hour countdown timer to automatically turn fans on and off to maintain preset temperature set points or use with up to three external relays for remote control of more than one fan. For grow
The 12579, Honeywell Remote Bulb Temperature Controller allows you to precisely control the temperature of a lightbulb. Use the included probe to save energy and increase light output from your bulbs. The wired controller features a SPST switch with a maximum operating temperature of 200º F, 5-foot lead wire, and fully insulated rotary dial. Required mounting hardware is included. A single unit uses two AA batteries (not included).
The Honeywell RCWL2308A103 Remote Bulb Temperature Controller is a thermoelectric device designed to limit the maximum temperature of a remote, electrically-operated, incandescent or high-intensity discharge (HID) bulb by turning off power to the bulb when it has reached the maximum safe operating temperature and by turning the bulb back on when its temperature drops.
The 12579 is intended for use in commercial refrigeration systems or used as a monitoring device for temperature sensitive products. The remote bulb temperature controller has NEMA 4X (IP65) rated metal case for outdoor and indoor applications. It has one set point input as well as one set point output (ambient). The Controller is factory set at 5 °C ±0.5 °C. Operating the controller with no attached transducer will result in TBD compensation not PID control. The controller can
Remote bulb temperature controllers are used to protect thermoelectric cooling systems in outdoor applications. Operating normally on 115V AC, these forced air control units provide fused short circuit protection and include a ground fault protection system equivalent to UL Standard 60601.
When you need a remote outlet to control an electric heating or cooling device, look to the 12579. It features an SPST toggle switch and uses standard thermocouple wire (14 gauge), which you can leave connected when it's not in use. Details: 1 SPST toggle switch, Thermister bulb temperature controller, Standard thermocouple wire (14 gauge) for communications with a thermostat or temperature controller (thermistor not included), Enclosure: plastic
Free Shipping
In stock
