24V OR 120/240V FARM-STAT LINE VOLT
The FANMOTION 24 V OR 120/240 V, T631F1084, designed for use with the line volt or low volt motors. THE FARM-STAT is a microprocessor-based controller that accepts current and voltage from a variety of sensors and actuators. For temperature of air, cut plant and soil surfaces, it provides sophisticated logic control outputs using these inputs to set fan speeds in coordination with lights or humidification equipment. The T631F1084 has 10 range settings on the 3 digit LED display, and a disable button to eliminate nuisance alarms.
The Honeywell FARMOSTAT line voltage thermostat with 24V or 120/240V heat anticipator and FARMOTOUR TM trip switch provides complete control for most 3-phase and single phase heat systems.
If you currently have 15 amp line voltage thermostat, then you can convert your control to 24 volts with a FARM-STAT 24V Control.
The FARM-STAT line voltage thermostat has been specifically designed to control the operation of a T631F1:84V-240V,AC electrically controlled water heater equipped with an intermittent pilot device. The control is capable of maintaining the water temperature at a set point within ± 2° F from the baseline.
We are pleased to introduce the newest addition to the Honeywell product line: FARM-STAT®. Features include separate outputs for both temperature and humidity, digital display, and sealed electronics for added durability in wet environments.
The 12630 T631F 1084 is a compact and robust Agricultural Weather Station with Ethernet and RS-485 interfaces. The FARM-STAT 35/100F 25 ft. version offers high accuracy for the most demanding applications.
The Honeywell 12630 FARMOSTAT, available only at The Home Depot, is an easy-to-install 4-wire ground mountable thermistor temperature controller. It is intended for controlling the temperature of a water source for heating and/or cooling livestock facilities, other agricultural uses, shade houses, and greenhouses.