Honeywell 2896 , Inc. Remote Bulb Controller 0-100F Setpoint Range 3-10F Diff 5 ft Copper Bulb

TEMP CONTROL SPDT 0-100F 5' CAP. IN

These bulb controllers, or SPDT temp controllers for short, can be used in any system that will control a circuit such as an HVAC system. Each SPDT temp controller comes with a capillary bulb, which determines the output temperature of the individual SPDT temp controllers. They are wired in series to increase or decrease the output setpoint. The range is 0-100F (0-38C) and the diff is 5 (Fahrenheit)

The Honeywell 2896 offers a maximum of 10F temperature differential and nominal control setpoints between 0-100F. The 5' capillary bulb operates near -46°F to +200°F (0-30°C). The 2896 allows you to not only control incandescent heating devices, but also any electrically heated glass-ceramic-infrared heaters. This handy controller is easy to install and easy to use. #N/A

5-foot copper wire, temperature controller setpoint range 0-100F at 3F increments with 5F differential sensor input.

This Remote Bulb Controller can control light sources like halogen, metal halide, and mercury vapor bulbs for a distance up to 5 feet. The SPDT (Single-Pole Double-Throw) switch is capable of solidly controlling the ON/OFF action at the bulb and controlling the temperature elevation with 2 setpoint ranges of 5F above ambient up to 100F above ambient. This controller includes a Power Cord (5 ft) and is compatible with electronic lamp sockets.

This is a 3-position temperature control with 5-foot (1.5 m) cable for use with either incandescent or halogen bulbs.

The Honeywell variable-voltage (VV) thermostat is designed to control any appliance or load whose operating characteristics and voltage requirements are compatible with the various voltages supplied by other VV thermostats. The remote bulb controller adaptor kit easily interfaces VV thermostat with standard incandescent, fluorescent, or high pressure sodium bulbs (HPS) used for landscape lighting, signs, etc. The kit includes: 2 wire guard, 5' capillary tube and 3 wires

The universal remote room thermostat allows for easy temperature control without opening windows or increasing A/C humidity. The thermostat is factory preset at 70 degrees F with a +/- 5 degree adjustable range which will provide accurate setpoint heating and cooling through your heating and air conditioning system. The unit works identically to the factory-level version, unless user adjustment is necessary. The comfort dial on the front of the thermostat provides temperature control from one to 100 degrees F with each click on the