Honeywell 2919 T7022A1010 60/90F RETURN AIR SENSOR 60/90F RETURN AIR SENSOR

DUCT MOUNT RETURN AIR TEMPERATURE S

Honeywell's T7022A1010 is a duct mount return air temperature sensor. This sensor works with Honeywell's Total Connect Comfort Series thermostats, and can be used to adjust the temperature of the return air. This allows for better heating and cooling control in homes and offices throughout the area. Features include an adjustable dial, and guarantees accurate readings year after year.

Duct mount return air sensor for split systems and packaged terminal units.

The Honeywell T7022A1010 60/90F Duct Mounted Return Air Sensor, 10/Pack helps to discern the difference between outside air and indoor air. This sensor is ideal for installation over the return air ducts of heating and cooling systems. The sensor provides temperature sensing accuracy of 10 +/- 3 degrees Fahrenheit (5 +/- 2 degrees Celsius). Use with your Honeywell Total Connect Comfort system with a Wink Hub and the Wink app to monitor temperatures while you're away from home or receive push notifications if temperature rises or falls beyond your control settings.

Duct mount sensors sense the temperature of the air being returned to the HVAC system and will automatically shut down heating or cooling when the temperature in the duct reaches 59F. This is called a return or exhaust air safety control function.

Monitor temperatures in vents and rooms with the Return Air Temperature sensor. This sensor has been tested to 60/90F input and 32-125F output, of most common HVAC equipment sensors. The sensor is powered by a 24 VAC, 30 mA output signal. System checks for low power when connected to a transmitter or control board.

Brighten up your home with the Honeywell Store Series LED RETURN AIR TEMP SENSOR. This sensor has a typical T90 response time, ensuring fast heat recovery when needed and giving you more control over your home's heating and cooling.

The Air Temperature Sensor monitors inside air temperature and compares it to the set-point. When the temperature inside reaches a high of 101 F, or a low of 33 F, a low temperature alarm relay is activated. A high temperature alarm relay goes into alarm mode when the sensor detects a high of 176 F, or at 122 F when a low of 25 F is set in. The thermostat is factory calibrated to be accurate in normal indoor applications, but can be easily recalibrated by readingjusting potentiometer R23 with the adjustable wrench provided in the control pack compartment.