HONEYWELL T775S2008 T775S2008 T775 Series 2000 Relay Expansion Mo

T775 Series 2000 Relay Expansion Mo

The T775 Series 2000 Relay Expansion Module controls up to five coils or contactors up to 25 amps each. It expands the current capacity of the T775 Series Relay Controller. The T775S2008 is a controller designed for use with H80, C80, C80N and N8424 Series control modules as well as other compatible alarm devices. The T775S2008 may be used with compatible S801L2000 Recorders and the R41 wired keypad to create custom control systems tailored specifically to your needs.

The T775 Series 2000 Relay Expansion Module features 16 large terminal screw terminals that accept up to #10 AWG wire harness connections, thus allowing several connected devices to share a single power supply. The relay pull-in (on) current rating is 10 Amps maximum.

The T775 Series 2000 Relay Expansion Module is a solid-state device designed for use with field-supplied supervisory signals to control the operation of up to eight switching circuits.

Expand your system and expand your control with T775 Series expansion modules. These 1200V, 2A contacts bring additional current capacity and flexibility to any HONEYWELL T775 controls or systems. They can be used as field mounted operators in new or retrofit systems, as either normally closed or normally open switching functions for light loads, or as holding devices to pass control of motor operation to more complex controllers. With two additional relays on the module and built-in voltage protection, these modules can be used for additional protection and redundancy in the system design environment.

The Honeywell T775S2008 is a relay expansion module that can be used with many different Honeywell alarm systems. The expansion module allows you to expand your system to control other devices and products, such as pool heaters or lighting in the house, garage door openers, security gates, lamp modules and other useful devices.

HONEYWELL Semiconductor Relays These devices are used as Overload Relays, Motor Overload Relays, Excitation Relays, Power Control Relays, Sense Relays, Solenoid Relays, Load Sharing Relays and Solid State Relays. T775 Series 2000 is usually used as motor protection relay or as a contactor replacement.

The 775 Series of expansion modules are designed to be added to T775 Series tabletop programmable logic controls (PLCs). The modules have 90 VAC/120 Vac terminal pairs and offer many features, including high voltage outputs, high current relay outputs, remote power down feature, high security password protection, and a free safety PLC. It combines the advantages of analog control with those of digital control by providing an economical solution with 7 or 15 bits for input and output.