Taco 2400-10-3P Hot Water Circulator Pump, 1/10HP

1/10HP 3450rpm 115V CI CircPmp

The Taco hot water circulator pump 1/10HP 3450rpm 115V CI (1 Phase) is used in radiant floor heating and other applications. Taco circulator pumps are designed and engineered for optimum durability and can be used in a wide range of water circulation applications. These types of pumps deliver hot water through thermostatic mixing valves to heating and domestic hot water baseboard, convectors and radiators and can be used with gas and oil furnaces. They can also be used to circulate warm/hot water from a fiberglass boiler to air handlers, air conditioners, humidifiers, radiant floors or pools/

The Taco Perm-Pump 2400 hot water circulator pump is ideal for circulation applications where pumps are installed indoors. The pump has a 1/10 HP, 3450 rpm permanent magnet motor. The pump is offered with 1/4?, 3/8?, 1/2?, and 1-1/4? NPT discharge ports. The Taco Perm-Pump 2400 circulator pump has the following features: • Ideal for circulation applications that require indoor installation • Bathroom fan circulated systems • Recirculating water heaters • Chemical feed systems • Indoor cold water humidification systems

This Taco 1/10-horsepower hot water circulation pump has a 3450 rpm NEMA 34 motor with double insulated 660°F working temperature for applications requiring extended hot water circulation. It is suitable for mounting on top of a tank or piping to prevent freezing or overheating. The pump mounts easily with the standard pipe nipple flange.

Expand your water heating capabilities with Taco Circulator pumps. High quality, low energy use, and built to last, they are available in both 1/10HP (3450 rpm) and 1/20HP (1725 rpm) models. When it comes to lasting power, Tacos high-efficiency thermal transfer pump is the top choice. Its cast iron construction ensures long life. Its superior reliability is best demonstrated by its metal impellers operating on permanently lubricated ball bearings. Each pump is completely tested before leaving the factory for maximum serviceability.

The Taco 2400-10-3P is a hot water circulator pump that allows you to circulate the water in your tank to maintain the proper temperature. This pump will keep water hot for fast draw off, prevent material from freezing and can be used in outdoor applications. It features a maximum operating pressure of 350 PSI and 0.1 horsepower with 3450 rpm of continuous duty.

The Taco 2400-10-3P Hot Water Circulator Pump comes with a cast iron construction for added durability, and its temperature range can be adjusted between 145° to 270° F. This circulator pump has an operating speed of 3450 RPMs, and includes an automatic thermal overload protector that meets or exceeds the CSA/NEMA motor insulation standard.

The Taco 2400-10-3P is a self-priming, open drip proof pump. It has an operating temperature range of 80°F to 180°F and a non-operating temperature range of -40°F to 220°F. This 1/10HP pump has a pump capacity of 200 gallons per hour at 0.25 GPH and 350 GPH at 2 GPH. It delivers 22 foot pounds of maximum pumping torque and 3 free floats.

The Taco 2400 series circulator pump is designed for circulation of fluids in industrial applications. Pump features thermally protected, cast iron housing with helical-type volute, integral motor mounting pad for ease of installation, and thermoplastic impeller.

The Taco Circ Pump is ideal for circulating water in your domestic hot tub, pond, fountain or hydroponic application. This pump comes with a 6' power cord with GFCI plug, 180 deg. 3-prong plug, removable strainer basket & cord/cable protector. The Taco Circ Pump features a permanently lubricated and sealed motor and bearings and is supported by a 1-Year Limited Warranty. The Minimax Series Pumps are completely factory assembled and ready for installation.

The Taco 2400-10-3P is our ideal circulator for any industrial application. This industrial hot water circulator is easy to disassemble and repair, making it an ideal choice for industrial applications. The Taco 2400-10-3P comes complete with a taco temperature controller that allows cooks to preset temperatures with +/- 3F temperature accuracy, and an audible alarm that alerts the user when the set point has been reached. With durable construction, this industrial circulator continues with active duty time after time.

As a leading manufacturer of boilers, Taco can offer a price and performance that meets even the most demanding customer. Taco has been manufacturing exceptionally reliable products for over 100 years, and every piece is manufactured with great pride in the USA

Hot water circulators are used to circulate hot water throughout the aquarium. This is typically used in fresh water aquariums where the temperature of the water needs to be increased or maintained at a more constant level.