Taco 2400-20-WB-3P 1/6HP WOOD BOILER PUMP

1/6HP WOOD BOILER PUMP

Taco introduces their 1/6HP Wood boiler pump, part number 2400-20-WB-3P. This wood boiler pump adds the quality of an air-cooled system to any wood boiler system, making it possible to feed multiple appliances with one wood boiler.

The Taco 2400-20-WB-3P 1/6HP Wood Boiler Pump is designed for residential wood boiler applications. It accumulates water for use by a wood heater, allowing the system to conserve energy. It includes an adjustable flow control, inlet water pressure valve, inlet water strainer, inlet/outlet check valve set and a motor cover.

The Taco 2400-20-WB-3P is a 1/6 horsepower wood boiler pump designed for applications where outdoor fountains are required to be heated with water from an external source. The pump has external valves for hot/cold water, high limit trip, on/off switch, flow limiter, and thermostat control.

2400 Series Wood Boiler Pump, 1/6 HP, Polypropylene Impeller with Cast Iron Journal Bearing, Inlet Dia. 1" - Outlet Dia. 1-1/4", Discharge at 5' of Vertical Rise at 28gpm and 105F Water Temperature, Full Load Amps. 2.7, Overall Height 17-5/16", Flange Bolts and Gland Nut for Wood Burner

Taco's wood fired boilers are designed to be compliant with all local codes. Our line of wood boiler pumps are used when installing Taco boiler wood fired boilers when either using the existing boiler or combined with an existing boiler when adding natural gas. The .5HP pump included in the Taco 2200 series units and the 1/6HP pump in the 2400 series units will deliver up to 15 gpm to heat your water supply. Which is needed when Boiler Capacity ranges between 8,000-10,000 gallons.

Protect your family and home from the danger of a gas leak with this Taco 2400-20 3-Wire Underground Wood Boiler Pump. Since it is powered by outdoor safe 1/4HP NEMA motor and consumes 240 volt single phase power, it will operate silently and efficiently while its automatic voltage regulator keeps noise to a minimum. With its solid cast iron pump head and body, you can be confident that this wood boiler pump was built to last.

The Taco Wood Boiler Pump with nominal head is the ideal pump for wood boiler circulation applications. This pump features an all brass construction, wide volute for maximum heat transfer, pre-assembled bottom inlet strainer, heavy duty mechanical seals, and an epoxy powder coated waterway. The Taco 2400-20-WB is factory assembled with 1" x 24" nipple for easy installation.