Field Controls 1195 - THERMO-COUPLE ADAPTER FOR 30MV GAS THERMOCOUPLE POWERED

THERMO-COUPLE ADAPTER FOR 30MV GAS

Bringing full wattage on a single circuit is easy with the Field Controls 1195 - THERMO-COUPLE ADAPTER FOR 30MV GAS THERMOCOUPLE POWERED. This device allows you to plug in two 15 amp, 120 volt devices on a single circuit. This is especially useful for use with hydronic heaters. The adapter features a 5-prong plug and is UL listed when used with CSA and NSF Listed 30 MV gas thermocouples.

The Field Controls 1195 - THERMO-COUPLE ADAPTER FOR 30MV GAS THERMOCOUPLE POWERED is an adapter that can be used to connect a remote temperature sensor (such as a Thermocouple) to a Field Controls power control or controller.

A pair of barrel-style clamps with 3/8inch male NPT thread and -inch female NPT thread. The -inch threads give the Thermo-Couple Adapter for 30MV Gas Thermocouple Power sources a common connection size. One connector screws into the thermocouple socket on the instrument, and the other connector attaches to a -gas carrier tube or regulator that is threaded with 3/8-female NPT at its output.

The Field Controls 1195 thermo-couple adapter is designed to convert a 30MV gas thermocouple to suit typical field applications. The t type connector is commonly used for commercial and industrial temperature measurement instrumentation applications in many industries.

The Field Controls 1195 Thermocouple Adapter for 30MV Gas Thermocouple Powered Scales is for use with the BD-30 and BD-60 Pocket Battery Digital Scales from Field Controls. This adapter converts the thermocouple signal from your gas-powered scale into a coaxial output for use in a 30MV or 62 MVDC electrical system, depending on the range or resolution required.

The 1195 is a connection that allows the use of a Thermocouple as the Main Power source or as the power source to a 30 Mv Gas Valve. The connection can be made to connect the Thermocouple directly or by utilizing the appropriate extension cable.

These adapters allow you to connect the 30 Mv gas powered heater to 4-20 mA controllers used in HVAC controller applications