JOHNSON CONTROLS TE-631AP-1 TE-631AP-1 TEMP SENSOR; 1000 OHM; NICKEL; 6

TEMP SENSOR; 1000 OHM; NICKEL; 6

This is a brand new 1000 Ohm Thermistor. This thermistor is suitable for many heating elements such as our heaters that use resistance, or a transformer with only 1000 Ohms. This thermistor should be used when the temp range desired is 90C - 360C (194F - 680F)

Johnson Controls Temp Sensor - For use in a variety of Johnson Controls' Temperature Sensors.

The TE-631AP-1 NTC 1000 Ohm thermistor is the standard for applications that require tight temperature control and high time accuracy. The hermetically sealed TE series thermistors are among the most accurate thermistors available. These 1000 ohm devices have a voltage drop of 1 volt per °C and exhibit an average temperature coefficient of ±0.2% °C (over range from -40 to +125 °C).

Compatible with Johnson Controls HVAC units, this 1000 ohm NTC thermistor is designed for use with single stage heating and cooling. This thermistor helps to regulate the heating and cooling process by sensing the temperature of the air, thus regulating voltage output.

The TE-631AP-1 is a 1/4" x 1/2" NPT thermistor that is designed for use with Johnson Controls CP0402 series of process controllers. The TE-631AP-1 thermistor is packaged in an 1812 black polyester hermetic glass.

The TE-631AP-1 is used to sense ambient air temperature. It should be located as vertical distance of not less than 2.5 cm from the outer surface of the heaters.

This part is a sensor (thermistor) for use in Johnson Controls temperature limit control equipment. The thermistor's temperature coefficient of resistance is closely matched to that of the human body, so it can be used in applications where short-term changes in body temperature are to be sensed such as in a pacemaker control system. The TE probe's sensitivity is 1% of full scale per 1C change in the measured temperature and the thermistor's response time is 40 seconds.