Johnson Controls 313509 , Inc. TE634AM2 WELL TEMP SEN 6" 2.25K WELL I 0

2.2K OHM THERMISTOR WELL MNT

Replaces : 313509 , TE634AM2. 316-0131, 316-0387, WELL TEMP SENSOR 2.25K WELL MOUNTED THERMISTOR 0-250 DEG F, 2.2K OHM THERMISTOR WELL MOUNTED, HEAT TRACE THERMISTOR

The 313509 thermistor is designed to be used with the TE634W2 resistive well mnt. The resistance value of this thermistor ranges from 2.25K ohms at 0°C to 0.88K ohms at 60°C. A wiring diagram can be found on the last page of this catalog entry.

Thermistor well-mnt device used to measure, and control temperature of molten metals in electric smelting and casting processes.

The TE634AM2 is a 2.5k thermistor well mountable to a thermostat housing. The low profile leads maximum compression for high maximum operating temperature installations. This Thermistor can be used with either a 4 ohm resistor heater or a 2O direct heating device, or a combination of both types.

The WELL TEMP series of thermistor pressure transmitters are designed to monitor the temperature of clean, dry air or refrigerants. They are ideal for HVAC applications where precise temperature measurements are required. The TE634AM2 is a 2.25kW sensor intended for use in well-maintained ducted air systems. The sensor is -7/+12 degrees F, NEMA Size 4X, Class A, 90% respond time <16 sec.

The WELL TEMP SEN 0 is a 2.25 K thermistor mounted on a 6 inch (150 mm) lead and sealed in a glass-to-metal, lead sheath assembly for rigidity and durability. It conforms to Specifications A-A-568C and A-A-573E and Type W thermistor class 1011.

With a resistance range from 2.5K to 5K ohms @ 25°C., this TE634AM2 thermistor delivers outstanding resistance stability. It is the perfect choice for industrial heating systems where critical water temperatures need to be maintained. The thermistor's composition creates a pure resistance value over a broad temperature range without a terminal wire, and its long-term stability ensures you can design your system knowing the thermal performance won't drift over time.

The TE634AM2 Well Temp Sensor . The sensor is designed specifically for well monitoring where the temperature of water in well storage tanks is to be continuously monitored. This sensor is ideal when paired with well level controls for applications including, domestic well/pond/tank monitoring, irrigation systems, recycling water from swimming pools, cisterns or cooling towers, and other applications where a free-standing sensor that is not affected by fluctuating water levels is needed.

TE634AM2 amplifier has built-in bi-metallic circuitry. This self-regulating system is designed to protect against short circuit damage. When short circuit current is encountered, the bi-metal expands within the thermistor cavity exposing more surface area to thereby increase the resistance of the thermistor. This causes current to decrease thus protecting the amplifier from damage caused by excessive current draw.

The TE634AM2 is a heavy-duty, 2.25 KW at 50 Hz, single-phase thermocouple well temperature sensor that operates in a variety of applications. It is a repairable design with an electrical rating of 150/300 VAC and AIC 271C.

The T634AM2 TE2 well temperature sensor provides resistance measurements in wells with temperatures ranging from 40°F to 130°F based on field-calibrated, shielded RTD technology. The well temperature is displayed using the front-panel thermometer.

Sensors and controls help you keep your equipment operating at its peak. Designed for equipment protection and optimal performance, our sensors and controls protect your valuable equipment from damaging heat. Ask us about our complete line of sensors and controls for air moving devices such as blowers, fans, axial fans and more.