Johnson Controls TE-636AM-2 , Inc. TE636AM2 WELL TEMP SEN 6"10K WELL INSE 0

WELL TEMPERATURE SENSOR

The TE-636AM-2 is an Incorporates the Inc. TE636AM2 WELL TEMPERATURE SENSOR

Johnson Controls TE-636AM-2 , Inc. TE636AM2 WELL TEMP SENSOR 6"10K WELL INSE 0

This Johnson Controls TE-636AM-2 , Inc. TE636AM2 WELL TEMP SEN 6"10K WELL INSE is used in the following products:

Johnson Controls 636AM-2 well temperature sensor is equipped with 4 3/8" (108mm) diameter well cover (ceramic, cast iron or galvanised steel), 0-300°F (-180 to 150°C) .00005F (0.00025°C) accuracy, 2-wire isolated shielded thermistor probe for well water applications, 4" (102mm) stainless steel cables connections provides easy installation.

Well Thermal Sensor, 60 Hz., 36 in. lead, dark bronze anodized adapter, integral strain relief and TP9 adapter, integral weather cap

The TE-636AM-2 is a well temperature sensor for a 4 wire resistance thermometer. It is a 1 inch probe wide tip with a 10K ohms series resistor. The sensing tip of the sensor is for immersed use only and ranges from 0 to 200 degrees F with a 0.5 degree F accuracy.

The TE636AM2 is a well sensor that can provide temperature measurements of water wells. It is also for use with the ConnectWise system, allowing users to record both depth and temperature readings taken at various depths in wells.

With the TE-636 sensor, monitoring temperature in a well does not have to be difficult. The TE-636 sensor incorporates a precision sealed RTD and thermistor temperature sensing element in a rain and water resistant housing encased in a commercial grade ABS plastic. The sensor is coiled and includes a stainless steel eyelet with nylon insulator to protect the sensor from accidental damage. This is one of many sensors that can be found on our web site.

A temperature sensor is an electrically operated device that detects temperature, or generates a signal in response to temperature changes. A temperature sensor used in control circuits has either a heating or cooling system attached to it to compensate for any heat loss or heat gain.

No matter what size or style building you have, Johnson Controls has a control product to help optimize energy efficiency. Whether it's a sensor-based system designed to conserve energy in critical mechanical rooms, a hardwired package including products such as a controller and sensors, or touch screen for easy automation. When it comes to energy management control solutions, Johnson Controls is ready with the proper technology for your facility.

The TE636AM2 is a trim, yet robust combination meter for use in hot water heating systems. It is specifically designed to be mounted on the primary heat exchanger or hot water pipe at a convenient location for temperature measurement and/or piping access.