Johnson Controls TE-636AM-1 10kOhm ThermistorSensorWellMt

10kOhm ThermistorSensorWellMt

Johnson Controls TE-636AM-1 10kOhm ThermistorSensorWellMt

The Johnson Controls TE636AM-1 10kOhm ThermistorSensorWellMt is designed to compensate process signals that are directly connected to thermistor inputs in a 9310 Johnson 4 in 1 network. This device provides a 10 kOhm 10 kOhm resistor at 25C in a large cartridge sealed against environmental conditions according to the ATEX II 2 G Ex ib IIB T4 Ga specification for use in Zone 2 hazardous locations. As part of a highly effective 4-wire resistance temperature sensor combination, this device prevents leakage current between the thermistors and wires from adversely affecting final measurements.

The Johnson Controls TE-636AM-1 ThermistorSensorWellMt is a 10kOhm thermistor sensor wired at 5 ft with green wire sleeving. It is an expanding sensor well mounting specifically designed for the TE-636AM-1 indoor air quality sensor. This thermistor sensor mounts onto round form pipes which are 38mm in diameter, allowing it to be mounted on top of the pipe.

This is a 10kOhm NaOH sensor and mounting plate. The 10kOhm ThermistorSensorWell belongs to the TE-636 series and is offered in a 3/8" hermetic threaded female or male well. Both of these thermistors feature epoxy encapsulated thermistors that protect the element from harsh chemicals and damage due to shock and vibration.

The TE-636AM-1 is a high temperature 10k Ohm thermistor. Thermistors are used as temperature sensors and as heating elements for such applications as Level Controls, Pump Controls, Bimetallic Coils, Overload Relays, and Electrical Fuses. The TE-636AM-1 is packaged in a rugged thermally conductive Metal package with a 1/2" NPT well mount and provided with standard 0.004" NTC thermistors to allow adjustment to customer requirements. The TE-636AM-1 is designed to be installed into the bottom wall of Level Controller

Johnson Controls Thermistor Sensor Manufacturer Part # TE-636AM-1

Here at Johnson Controls, we're rethinking how we develop, build and service the world. We're making it our mission to be the corporation of choice by putting customers first and finding new ways to create growth that is more meaningful and sustainable.

No. TE-636AM-1

A thermostat is a vital component for any heating and/or cooling system. As the heat source, it senses the difference between the current temperature and that which you have set and then turns on or off as needed to maintain that setting. It also pushes coolant through radiator fins to dissipate heat. And it controls hot-water units, such as those used in radiant floor systems.