Johnson Controls TE-6361P-1 "8"" DuctMountThermistorSensor"

"8"" DuctMountThermistorSensor"

Johnson Controls 8"" DuctMountThermistorSensor"

Johnson Controls TE-6361P-1 "8"" DuctMountThermistorSensor" is a Johnson Controls brand that works as a Sensing and Controlling device. It is easy to use and designed specifically for HVAC & R applications. The measuring range of the probe is 0 to +14 Degrees C with a temperature resolution of 0.1 Degrees C, 1 PPM CO2, and 5% CO2 at rated flow.

Johnson Controls TE-6361P-1 "8"" DuctMountThermistorSensor" The Johnson Controls TE-6361P-1 "8"" DuctMountThermistorSensor" is an outdoor temperature sensor that features a compact, weatherproof design. This thermistor sensor offers a wide range of -40° to 185°F (-40° to 85°C). The sensor can be installed in the ductwork of an air conditioner or furnace using the two included mounting brackets.

This thermostat will help you control the temperature in your home, garage, basement or office. It comes with a standard wall plate that matches your current decor and can be wired directly into a 110-volt outlet.

DuctMountThermistorSensor Johnson Controls TE-6361P-1 Thermistor Sensor, 8"" Lead Length, Type K Nickel Chromium Resistance Thermistor with 300 ohms Nominal Resistance and 9.5 K Ohms / Degree F Nominal Sensitivity and 4.84 mV/ Degree C Linear Output, Type K Temperature Coefficient of Resistance 0.0029 Ohm Per 1°C, Type K Temperature Coefficient of Sensitivity -0.

TE-6361P-1 #DuctMountThermistorSensor

Johnson Controls TE-6361P-1 "8"" DuctMountThermistorSensor"

The TE-6361P-1 "8"" DuctMountThermistorSensor" is a smart, efficient and reliable solution for monitoring HVAC systems and appliances. The TE-6361P-1 "8"" DuctMountThermistorSensor" easily mounts to the ductwork of heating, ventilating and air conditioning (HVAC) systems and appliances such as hot water furnaces. This thermistor sensor is constructed from stainless steel / brass for long lasting durability.

Used in power generating plants, industrial process control and commercial applications. The TE-6361P-1 is a duct-mount thermistor sensor with a 1"" diameter probe that converts a temperature or airflow into an electrical signal proportional to the measured parameter. The sensor provides an output voltage that is linearly proportional to the air temperature from 0°C to 100°C. The electrical signal can be used directly for controlling central heating, domestic hot water and process plants.

This 8"" DuctMountThermistorSensor" is a Johnson Controls brand product. Designed to fit into a standard round duct to provide temperature information. Fitted with adhesive pads, it can be easily secured in place without the need for tools or extra mounting brackets.