Johnson Controls TE-6363P-1 "3"" OutdoorAirThermistorSensor"

"3"" OutdoorAirThermistorSensor"

When it comes to heating and cooling your home, KCP&L's "3"" OutdoorAirThermistorSensor" thermostat uses a few simple steps to keep you comfortable and reduce energy usage. FIND OUT HOW TO CONFIGURE THE OPTIMAL SETTINGS FOR YOUR HOME

The TE-6363P-1 "3"" OutdoorAirThermistorSensor" from Johnson Controls is a thermistor sensor for use in residential and commercial HVAC systems. The SE9410M 10 Amp 2/3 HP motor provides the airflow for this unit.

The OutdoorAirThermistorSensor by Johnson Controls is a thermal sensor that can be used to sense outdoor air temperature without any additional mounting hardware. The TE-6363P-1 has a 3"" sensing element and an NTC thermistor designed to sense outdoor air temperature between -40 and 185 degrees Fahrenheit with a resolution of 0.5 degrees Fahrenheit. This sensor comes as a fully assembled circuit board with cable attached, and requires only a 1/4"" hole for cable entry and simple soldering to mount onto a PCB or onto wires.

The OutdoorAirThermistorSensor is an aluminum housing once-through solar air device with a sensor connected to bimetal system. The outdoor sensor is connected to the terminal board by providing current or voltage signal. It has marked connection point for direct wiring, no connecter required.

The OutdoorAirThermistorSensor is used to measure temperatures outdoors. The sensor is encapsulated in a NEMA-4X panel mount housing that allows for easy installation. Analog output signal voltage corresponds to the ambient air temperature in Celsius degree.

Our Johnson Controls TE-6363P-1 OutdoorAirThermistorSensor is compatible with the OmniPro II, DMCseries, andTranstherm. Its compact design offers you maximum flexibility by eliminating the need for hoses, valves, or pre-assembled panels. Made with only the finest materials, this OutdoorAirThermistorSensor is engineered to help keep your temperature just where you want it.

The OutdoorAirThermistorSensor is the industry's smallest, yet most accurate thermistor sensor in a variety of operating conditions

The OutdoorAirThermistorSensor module provides measurement and controls of outdoor air temperature. This module is used for heating, ventilation, and air conditioning (HVAC) systems to monitor outdoor or ambient air temperature (MAT). The OutdoorAirThermistorSensor can be used for self-contained applications that require continuous monitoring of the MAT.

The Outdoor Air Thermistor Sensor (TE-6363 P/N) is used for automatically controlling heating, ventilation, and air conditioning (HVAC) systems. Commonly used in homes, office buildings, schools, hospitals, parking garages and any other facility that requires precise temperature control year-round. The outdoor air thermistor sensor measures the ambient room temperature at a set point and signals a heating or cooling system to start or stop as needed. Commonly used to determine when an indoor unit will need to come on or a furnace will need to trip due to a high or low temperature outside.

It's the sensor that saves energy in the air-conditioning, ventilation, and air-handling industry. The TE-6363P-1 outdoor air thermistor sensor is an easy to use option that features a solid state design for ease of installation and maintenance, protection against overloads with self-resetting fuses, and two separate power inputs for redundancy. This outdoor sensor is commonly used in energy conservation schemes.

The TE-6363P-1 outdoor air thermistor sensor is a level dependent discharge sensor designed to signal a gas discharge controller to cycle the compressor on and off based on the temperature of the air input.

A TE flue gas thermistor sensor is an absolute humidity sensor that measures outdoor air temperature. This means that you can accurately regulate flue gas temperatures leading to energy savings and reduced pollutant emissions. The connector is 3/8"" NPT. This product has precision welds to withstand tough jobsite conditions, making this product both rugged and reliable.