JOHNSON CONTROLS TE-6351P-1 DUCT PROBE SENSOR 8" REPLACES TE-6321P-1

DUCT PROBE SENSOR 8" REPLACES TE-6321P-1

The TE-6351P-1 DUCT PROBE SENSOR 8" is a duplicate of the TE-6321P-1. It can be used as a replacement for that model or may be used as an alternate if the need exists.

The Johnson Controls TE-6351P-1 Duct Probe Sensor is a replacement part for the older model TE-6321P-1. This probe sensor can be used to control room temperature.

The TE-6351P-1 is designed to meet the highest standards in durability, precision and accuracy for non-intrusive air flow measurement. The TE-6351P-1 Duct Probe Sensor can be used with any JCI digital probe controller in both hot wire an ducted applications to measure air flow rate when there is no contact with the air stream. A factory calibrated resistor allows precise calibration of the sensor when installed in your ducting system. This sensor has a 0.5% repeatability when tested per ASTM E1527 requirements.

The TE6351P-1 is a replacement for the obsolete model TE6321P-1. This sensor can be used to sense temperature within a forced air heating system by mounting it in the discharge ductwork. The sensor's long probe tip is inserted into the return or supply ducts on the opposite side of where the blower wheel is located. The probe tip can be inserted from either direction without damaging it. This probe monitors return air temperatures on systems with up to 3 stages of heating.

The TE-6321P-1 is a 1/4'' diameter metal tube probe with 12'' lead wires to connect to kW analyzer, electric air heater or air conditioning control board under test. It is for testing for blown out heating elements, thermal runaway situations, cool air leaks, duct leaks, system operating parameters

Johnson Controls' TE6321P1 Duct Probe with 8" bend allows building managers to measure temperatures in heating and air conditioning ducts, identify locations of air leaks, and discover air flow patterns within the system.

The TE6351P-1 is compact, lightweight TR-style probe with 6" tip radius. It senses air flow rates in HVAC ducts to find leaks or measure velocity/volume of airflow. The TE-6351P-1 is designed to replace the discontinued T632SP-1. The TE6351P-1 includes a crimp-on female Discharge Adapter allowing for quick and easy hookup to the tubing, while the male Discharge Adapter operates at both high and low gas velocities.

The TE 6351P-1 is designed for use with the 675-1031, 675-1032, 675-1033, 683-1003, TE 7030A, TE 7330A and TE 7330B duct gas analyzers to monitor O2 or CO in heating or air conditioning systems. The probe contains a 1/4" diameter Ag/AgCl electrode sealed in protective boots filled with 1.0M HCl electrolyte solution.

The 8 in. Duct Probe is a fan speed controller accessory for a variety of single-phase, low voltage fans including:

A Duct Probe is essential for most HVAC installations; they allow the HVAC technician to easily make readings in inaccessible areas. This particular probe features a pure lead axis for longer life, and has a scale on it that allows easy readings in terms of Ohms when the probe is touched to something else.

Johnson Controls , Inc. is a worldwide supplier of systems and equipment, serving customers in heating, air conditioning, refrigeration and a variety of other markets. Founded in 1886, the 100+ year old company supplies products to a wide range of industries.

Design and installation of comfort systems and their related controls and equipment should be carried out by someone suitably qualified and experienced in heating and air conditioning (HVAC). If you are not suitably trained and experienced to carry out such design, maintenance or installation work yourself then you must employ a suitably qualified person, such as an HVAC engineer, to carry it out for you.