1K DUCT PROBE SENSOR 18in
The specially designed 1K DUCT PROBE SENSOR 18in is made of high temperature thermoplastics for use in harsh, hot environments. This versatile probe can be used to measure the temperature of ducts. This probe features a dual-function tip that can be used as either a thermistor or a spring-loaded sensor. The cable length of the 1K DUCT PROBE SENSOR 18in is 48in.
A reliable temperature sensor is a must-have for anyone working in buildings. With a range of –58° F to +158° F, this Johnson Controls 1K DUCT PROBE SENSOR 18in can accurately measure temperatures in dusty and dirty environments. Featuring a thin design that's easy to insert into confined spaces between walls, this temperature probe is designed for continuous or intermittent use with no downtime for recalibration.
Fresh air from the ducts is essential to every home. With the TE-631JM-1 1K DUCT PROBE SENSOR 18in, you can ensure your home stays at a comfortable temperature. Designed to read the central heating equipment's operating status, this product will alert you if there is a problem with your unit so that it can be repaired before being used. Conveniently sized, you can carry it around the house with ease as you check if the system is working correctly.
Johnson Controls TE631JM-1 1K DUCT PROBE SENSOR 18in, ENERGY STAR Qualified, 0 to 40 C (32 to 104 F), Includes 2-Prong, 200mm (8 in) Cable, Length = 18 in
The TE-631JM-1 1K DUCT PROBE SENSOR 18in is designed to be used with the Johnson Controls 279910 duct probe system. The probe sensor has an 18 inch cable that attaches into the probe.
Johnson Controls TE-631JM-1 1K DUCT PROBE SENSOR 18in (508 mm) Johnson Control's Sensors calculate the flow of air in cubic feet per minute (cfm) for ducts sized 4 inches to 144 inches (102 mm to 3,658 mm). Ideal for use with ventilation products where airflow or carbon monoxide monitoring is desired. As a portable instrument, the Sensor gives you the flexibility to measure over obstructions and through tight spaces where permanently installed measuring devices cannot reach.
This Johnson Controls TE-631JM-1 Duct Probe 18 in. has a sense area of 1 in. and features tethered shield cone. Applications include air conditioners, commercial refrigeration equipment, residential refrigeration equipment, air handlers, packaged rooftop units, commercial boilers, packaged boilers, commercial cookers, packaged cookers and commercial ranges.
The Johnson Controls Duct Probe TE-631JM-1 is a 1 kW air temperature sensor that interfaces with a DCI Series controller. The probe has a sheath length of 27 in, a sheath diameter of 0.156 in, and is insulated from the conduit with the use of flexible polymers. Available accessories for this probe include a conduit box and one receiver tube for multiple sensor installations as well as a direct-snap receiver tube designed to mount directly to the duct wall. For added convenience, the probe also features a push button actuator on the end of the wire for easy installation.
A Perfect sensor to be placed in a floor duct to take air samples from multiple floors.
The TE-631JM-1 Thermo Fisher™ probe is a special probe for measuring temperatures in heated duct work where the air has already been heated elsewhere. This 1,000 ft. (304.8 meters) probe works with the DS150, DS200 and DS20 outputting up to 10A to the probe.
For HVAC technicians needing to take duct temperature measurements, the TE-631JM-1 will fit all your temperature sensor needs. It is capable of reaching -58C (-72F) to 752C (1300F), providing accurate temperature data in the harshest environments.
The TE-631JM-1 works as a single channel temperature measurement sensor with a 4 to 20 mA current loop. This provides a simple and cost effective method for measuring temperature over a wide range of applications including thermostats, PLCs, linear actuators, solenoid operated valves and lights, and communications system interfaces.
Free Shipping
In stock
