Johnson Controls 231866 , Inc. TE635AP1 Well Temp Sen 6in 1K Pt Well insertion

"6"" 1K Ohm Sensor W/Conduit"

6" 1K Ohm Sensor W/Conduit

The TE635AP1 is a 6"" 1K Ohm resistive platinum-finished sensor with a PVC conduit, a self-stabilizing stainless steel housing and a 3/4"" MNPT locking connector.

The 1K ohm sensor has a +.01/+.04 ohm temperature tolerance and 30% accuracy and is designed for and supplied with an 18"" extension cable and cap.

The TE635AP1 is a 1k ohm temperature sensing element in a conduit with a conductivity of about 1%. This product is a sensor for a well. It is used when the process pipe has been slotted to hold the probe, and when no additional electrical connections are needed.

The TE635APH1 is a thermistor type sensor with 1,000 Ohms. It allows the user to monitor for high or low water temperatures frequently in irrigation or sprinkler systems. The TE635APH1 features a 6"" stem that measures 6"" insert length by 2-1/2"" I.D. (measurements may vary depending on junction box used).

The Tentek TE635AP1 sensor is the latest addition to the Tentek family of temperature sensors and comes with a high quality material and construction. This particular model is a 1K Ohm platinum resistance thermistor with a thin wall TE-6 tube jacket, thin wall conductive shielding is constructed out of copper and polytetrafluoroethylene . It is designed for monitoring temperatures between -40°C and +200°C (operating temperature -30°C to +120°C).

The TE635AP1 is a thermowell with a 1,000 ohm thermal resistance and a 3/4" NPT conduit fitting for insertion into the earth. The TE635AP1 sensor is designed with an integrated 99Pt probe and no wire leads.

The TE635AP1 is a 1" pin type miniature thermocouple (with extension cable, conduit), with an operating range of -50 to 760°F (-45 to 400°C).

The TE635AP1 is a sensor for use with the Tridium Niagara AX. It has a threaded conduit that helps connect it to standard Tridium 450 piping. The 1 meter cable connects the sensor to a reader.

Well temperature sensor for a wide variety of applications. Designed to provide temperature readings from a well to a temperature recorder or controller.

While the TE635AP1 is not required for compliance in your local jurisdiction, installing in heat transfer piping in accordance with ASTM E 1404-05 or CAN/CSA B369.1 can improve the efficiency of your cooling tower system. This sensor is necessary when converting boilers to run on glycol instead of conventional circulating water.

?????. TE-635AP1- ? . ? . ? . ? . ? . ? : ? , ? 0 ? , ? 0 ? $ $ $ $ $ $ $ $ $ $ $ $ % % % % % " _ 7 7 8 8 9 9 3 3 A A A + B + C + E + F - H - I + J - K - L M - M + N ' ' 1 1 4 4 5 5 & & 2 2