PRESS SWITCH PLASTIC 1/4 MPT
TECMARK CORP. 30?10S PRESS SWITCH PLASTIC 1/4 MPT - A Complete line of push to make or break switches in wide range of sizes, configurations and actuation times.
Press Switch Plastic 1/4 MPT is a plastic or nylon lever that provides manual actuation of a normally-open electrical circuit. It is particularly suited for applications that require a high degree of water resistance.
Press switches, plastic 1/4 MPT, Sold in packages of 5
Press to serve. Our line of plastic press switches is ideal for commercial, process control or household applications. With working functions from 1/2 inch to 6 inches, you're sure to find the right "Press" switch for your application.
Press button washer #10 x 3/8 inch long; Furnished with plastic nut #10 -1/4" female x 3/8" long; 1/2 inch projection from panel 0.180 inches maximum thickness. Use standard polycarbonate or triloc threaded inserts to accept this switch.
This button is a plastic style fused electrical switch. The switch mounts to a PCB via two holes that are not threaded and also serves as the plunger mechanism that actuates the switch. A metal round disk also snaps into place over the plunger mechanism to help support it when not in use.
A switch that is operated by pressing it against a stop. It differs from a push-button switch which is operated by pushing a button directly above the switch. A hazardous location approved plastic switch with molded handle. The plated steel lugs are easily accessible for wiring.