HOSHIZAKI
Float Switch 4A3624-01 HOSHIZAKI
Float SwitchHoshizaki Float Switch 4A3624-01 provides an easy repair effort solution to float switch failure, as well as being a good spare part for preventative maintenance. The Part Number is...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountTEE for Hoshizaki - Part# 4A0177-01
New TEE for Hoshizaki - Part# 4A0177-01.
This is a TEE for the Hoshizaki CB-35D-A3 water tank, part number 4A0177-01.
The Hoshizaki 4A0177-01 Tee attaches to your Hoshizaki icemaker to allow soft water to circulate into your ice bin. This tee is not required to operate the icemaker but will improve water quality of the ice. Includes grills, elbows and connectors.
When installing the Ice Machine Ice Cube Proccess Tube (Part# 4A0177-01), Please use TEE part# 4A0179-01.
Tee for Hoshizaki controls the flow of coolant through the line set, keeping parts of the machine ice free even during peak operation. Tee for Hoshizaki features include: easy installation, small size to fit anywhere in the machine, automatic pressure relief release valve opens at 26 psi to prevent any damage to your equipment.
The TEE for Hoshizaki is designed to work with the Hoshizaki MSD-500 and 0.75" - 1.5" tubing "hosebarb" style drains. This allows you to quickly discharge from a drain line. You can deploy this tee for use in retrofitting into an existing setup, or directly deploying into a new setup. In addition, this tee can be used as a dip-net discharge fitting, fishing bucket fitting, etc.
The TEE for Hoshizaki tubing end elbow is used to start water circulation into your Hoshizaki ice maker. Made of durable brass construction, this elbow has a high grade sealing system to ensure proper freezing temperatures are maintained until water refills the ice maker.
This TEE plug is for the HOSHIZAKI part numbers 2FA-D4740-0 & 5FA-D4735-0. It replaces the original plug that comes with these chillers, however it does not include the wires that connect to the compressor. This TEE is smaller in size than the original, and has a rectangular hole instead of round hole.
When replacing the TEEMEISTER connections for your Hoshizaki ice machine, make sure to purchase these TEE pieces along with it. Use these TEE pieces to connect the water line from your ice machine to the water line that feeds the rest of your equipment. This tee has three connections, with one side feeding ice cubes to the condenser unit and refrigerator section of your machine, and the other two lines supplying cold water to other parts of your bar or restaurant.
Simply screw the Tee into the back of your icemaker, and connect lines from your icemaker to both branches. The water supply flows through the Tee and out both branches. Order your Tee for Hoshizaki today, and relax knowing you've got a trusted teesupplier.
Quick and Easy Compatible Part
Make a hole in the ceiling above the ice machine.