TEKMAR 55809 Slab Sensor 20'wire Controls 072

Slab Sensor 20'wire

Looking for a simple, affordable way to control your heating and cooling? Tekmar presents the Slab Sensor 20'wire. This sensor features a plug and play wiring system that easily can be installed in one of three ways:Â Â just wire to a wall thermostat, wire with a contactor or wire to an electronic room thermostat. Each sensor comes with two 18'wires attached, and is designed for indoor use with 100'cables.

TRIAC Slab Sensor 20'wire Controls 072. No more burnt fingers, with these cool touch controls. If you have installed or are planning to install a gas fireplace, I don't know how you have survived without the advantage of using a set of these neat controls. This set works with any gas fireplace that uses a pilot light. They work in conjunction with each other, one to turn the pilot light on and off, the other to electrically adjust the flame height. They are 15 amp and hold up well under constant use. I used them for over 6 years on my own personal fireplace that I had

The TEKMAR 455410 Slab Sensor 20'wire Controls 072 is for use with the TEKMAR Slab Sensors 454411 and 455410.

The TEKMAR 55809 Slab Sensor 20'wire is a temperature control for radiant heating that can be used with an existing hot water system. It features a durable design resistant to corrosion, and is CSA-certified for safety.

Keep your vital temperatures under control with the TEKMAR 55809 Slab Sensor 20'wire. Designed to monitor a space up to 5000 cu ft, this sensor will notify you if your temperature gets too hot or cold. It includes a Dry Contacts output that can trigger an alarm or other device, a Triac output, and an adjustable k-type thermocouple probe with KLIX screw terminals.

This 20' wire Slab Sensor with 0-10V output from TEKMAR Controls can be used to monitor any stationary objects that need temperature monitoring. It operates silently and continually monitors the surface in which it is installed. This sensor is great for measuring a wide range of temperatures without affecting the environment being measured, making it perfect for commercial and industrial applications.

The Snowline TM Slab Sensor wire is used for hot deck slab decks. Operates on 24 volts, features water resistant ?O? ring type terminals and a 15 minute timer to prevent over heating and melting the cable insulation.