SCHNEIDER ELECTRIC 30999 THC3 TWO-POSITION ENTHALPY CONTROLLER THR

Enthalpy Controller w/o Elec. Box

The 2341-502 Pneumatic Receiver Controller is a 2-wire pneumatic control valve receiver/controller designed for use with pneumatic transmitters having a 3 to 15 PSIG range and a pneumatic pressure output of 1/8 NPT or M12 x 1

It is used in applications where the remote control signals must be amplified, filtered and converted to an adjustable voltage level needed by the process valves

The 2341-502 is a receiver with a controller that can be used in various applications

The Schneider Electric 2341502 2341-502 Pneumatic Receivers Controller is a pneumatic controller designed for use with the 2-wire, 2-stage and 3-wire, 2-stage or 3-stage transmitters

The receiver can be mounted in any position as long as it is protected from moisture

The pressure output is linear and proportional to the control input

The SCHNEIDER ELECTRIC 2341-502 2341502 Pneumatic Receiver Controller RA (P541-RA) is a receiver controller that incorporates a solenoid valve and its own electronics into one complete unit

This module requires 24 V DC power supply, which should be provided by an external source

The receiver has two mounting holes on the right side panel and one hole at the bottom of the front panel

The 2341-502 Pneumatic Receiver Controller (P541-RA) by Schneider Electric is a high reliability pneumatic controller that features increased protection against short circuit and over pressure

The unit can be used to control loads up to 4A/240VAC, 5A/125VAC and 24VDC

The RA Pneumatic Receiver Controller RA (P541-RA) from Schneider Electric is a pneumatic module that offers a controller function and can be integrated in a larger system

The P541-RA is designed for applications where all valve controls are located in one room

The P541-RA Receiving Controller is a modular controller with a high level of integration and added value specific to the Air Valve Actuation market

This product shall not be used as a component in life support devices or systems without express written approval by the manufacturer

SCHNEIDER ELECTRIC 2341-502 2341502 Pneu Receiver Controller RA (P541-RA) - Schneider Electric

For example, the 2341-502 can be used to control the pneumatic valves of an air conditioning system by activating the valves only when cooling is required

The module has 4 pneumatic inputs and 6 outputs, and allows for 2 programmable functions

The controller is easy to install and program

The unit provides a differential pressure signal with a range of 0–10 Vdc

It operates using fieldbus technology, with an external connection of 1 x EtherNet/IP

The receiver controller directly controls the power supply to the electrical equipment, ensuring energy savings and increased safety

The controller unit has an alarm output and a switch contact output

The modular design allows easy expandability when multiple control functions are required

This product is for use in air-conditioning, refrigeration and heating systems, where the controller may be used as an actuator or a sensor

The output is configured via Schneider Electric's WebCONTROL device configuration software and downloaded to the controller via Ethernet or USB

5

The Schneider Electric 2341502 Pneumatic Receiver Controller (RA) is used for controlling pneumatic functions

It provides a 24VDC output signal and is very easy to install

The RA Pneumatic Receiver Controller is designed for compact pneumatic receiver applications that require low to medium control or feedback signals