TIEDOWN ENGINEERING241-86489 2 VBOW STOP 3/8 SFT BR

2 VBOW STOP 3/8 SFT BR

The 241-86489 2 VBOW STOP 3/8 SFT BR from Tiedown Engineering is a part of the Vbow Stop product line. Part Number 241-86489. This item is made in China.

This 2 Vbow STOP is used by Tie Down Engineering to secure the bow of a barge during reeving, or removing and installing Wench assemblies, or for tensioning the mooring lines on a barge under construction. 3/8 SFT Bolts included

Driving through the night with your family is the worst! You can't see anything and it's so hard to pull around. If your family has a trailer that has a spare tire you should use a few of these Tie Down Engineering Towing Products along with a few red clearance LED lights to make life easier. The first thing you should buy is a Burly Flatbed Burly 300lb Vbow Stop 3/8 Sft Br. This should be what holds down the spare tire from moving from side to side from all those uneven tar road dips. Be sure to check out all their products for other needs you will

Stop your range of motion! Constructed of virtually indestructible polyurethane, this bow stop is twice as thick as the standard 2-bow stop. The 2VBOWSTOP 24900 features 3/8 inch mounting holes that are spaced 2 inches apart.

A v-Bow stop is a metal reinforcement bracket that attaches to the face of a vertical bow to stabilize the bow in high wind conditions. The bracket covers one half of a board and is installed with 3/8 sheet-metal screws.

Two (2) replacement Bow Stops 3/8" Shank diameter 30" long.

Designed to provide an easy-to-install method to stop the bow from rolling when anchoring or docking, this winch-line stopper from Tie Down Engineering is a heavy-duty, all-weather nylon strap with a comfortable handle. The strap features a 3/8" shank diameter and has a 3/8" stainless steel clevis pin that swivels 360 degrees for smooth movement while moored.

These Bow Stop Snap Hooks have a unique bow design that creates a 5,000 lb break strength rating. They allow the bow to flex into the eye of the hook. The stop prevents the loop from sliding through the bow eye, which enables a safe and secure connection from one point to another.

Stop covers can be used to protect stop hinges. The nylon cover protects the stop hinge from dirt, rust, and reduces noise. The spring loaded tensioner insures secure fitment under load or shock.

Our tie downs are zinc plated for increased corrosion resistance and have a bow stop to help prevent slipping. These tie downs are designed to be used with the EAA Tiedowns 18245316-100 package which includes 2 ratchet straps, 6 S-hooks, 6 metal bow stops, 6 plastic bow stop retainers, 6 plastic bumpers, 6 strap locks.

A carefully constructed stop knot that can be used as a stop to prevent a bowl from sliding down the outside of the mount and rolling over and to stop and stabilize a line on a spool or cord. Ideal for attaching to front or rear axles on your screen house, rain gear, coats and other items that require this type of securing.