Honeywell 290818 PREMIER WHITE 24V/750 MILLIVOLT WI-
PREMIER WHITE 24V/750 MILLIVOLT WI-Honeywell has been a trusted name for more than 100 years. Our PREMIER White 24V/750 Millivolt Wi-Fi Thermostat gives you the freedom to manage your home's...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountPNEUMATIC THERMOSTAT 1 OR 2 PIPE DA
The Honeywell 3120 Thermostat Pneumatic 1 or 2-Pipe DA is a direct acting thermostat that can be used on the pneumatic side of a system. It is compatible with boilers and furnaces with 3, 4 and 6 inch diameter air ducts. It's adjustable pressure-select switch has an onset pressure of 0.5-15 psi to 1-30 psi and a maximum of 0.8 to 10psi. It cannot be used to
All of your home comfort needs in one easy product. The Honeywell 3120 Series is a 2-stage, pneumatic ... Thermostat 1 or 2 pipe design. Combination on/off and ... control. 3/4 or 1-1/2 Inch diameters. -25 ...
The Honeywell CT87N Pneumatic Thermostat is a 2-Pipe electric pneumatic thermostat designed for use with any forced air heating and cooling system. This model includes a built-in air relief device that relieves high pressure in the duct work when the thermostat calls for cooling. The thermostat also includes an auxiliary set point adjustment feature which allows you to change the set back temperature after the thermostat has been programmed.
The Honeywell 3120 Thermostat is a pneumatic programmable thermostat for two-pipe direct acting applications. It features a fully sealed mercury switch and all hermetic electrical components in a micro-switch sealed enclosure.
The Honeywell Pneumatic Thermostat is a single stage 1/1 or 2/2 capacity non-programmable 45 to 90°F (7.2 to 32.2°C) thermostat with the following characteristics: - 24 VAC @ 3/4 Amp - Pneumatic Common makes it compatible with up to 3-wire low capacity (HC) heat pumps or boilers.
NOTE: This thermostat is not for replacement use on a Nest Learning Thermostat. Honeywell's Pneumatic TH1-21 Series Pneumatic Gas Valve is ideal for installations that require a single stage, normally open (not shown) or normally closed gas valve. It provides airflow to the room when it senses low pressure and closes when high pressure occurs. Filter drier and trap required.
Honeywell's pneumatic thermostat is designed to adjust gas-fired appliances. It matches with Honeywell’s gas control devices and is an ideal solution for your heating needs. Features: Easy installation, Adjustable thermostat Min/Max temperature adjustment, This thermostat has two-probes which easily set the desired temperatures, It turns on automatically between 40 and 80 F unless the two separate probes are placed in different locations in a building with multiple zones. The contact element