Trane BLW1320 2-Stage Inducer Assembly

2-Stage Inducer Assembly

Trane provides HVAC equipment and services in the residential, light commercial, industrial, and government sectors

Make your HVAC system efficient, clean, and quiet with the Trane BLW1320 inducer assembly

A 2-stage inducer is where there is a clog or restriction of debris in the primary and secondary condensate drain line, which then causes a restriction in airflow through the coil

The condenser coil outdoors is located on a metal heat sink that is cooled by the outdoor fan motor

It also serves as an integral part of the refrigerant circuit and helps remove heat from the home

Trane 2-stage inducer assembly 1320

One of the most common refrigerant related issues with a central air conditioner is a 2-stage inducer

The Trane 2-Stage Inducer Assembly is a 2/3 horsepower motor that increases the velocity of air intake to the blower wheel

Designed for use with gas furnaces, this assembly is used to deliver high volume and velocity of air to the burner over a wide range of operating conditions in order to provide maximum combustion efficiency

Trane is a brand of Ingersoll Rand

The indoor coil has refrigerant flowing through it to provide cooling to the air in your home

2-Stage Inducer Assembly for Trane Air Conditioning

With a heat transfer coefficient of 0

The Trane BLW1320 two-stage inducer assembly allows your furnace to function at a temperature of up to 130 degrees

This is the new assembly that is used in the following models: 13TW1320-1, 13TW1320-3, 13TW1320-4, 15WU03600BA, 15WU03600CA

The inducer assembly is sold individually and compatible with Trane ball bearing heat exchangers

If you are experiencing reduced airflow, or uncomfortable temperatures on one side of your home/building, this may be caused by a clogged or restricted 2-stage inducer assembly

The Trane BLW1320 2-stage inducer assembly is a replacement part for the following product:

This Trane part has been tested and validated for your Trane equipment and is covered by all applicable warranties

The Trane BLW1320 2-Stage Inducer Assembly is part of a complete system, which includes the condenser, evaporator, and indoor coil

Trane BLW1320 2-Stage Inducer Assembly is a part which controls the air flow in heating and cooling systems

This will result in low airflow and can lead to system damage and reduced efficiency

This inducer assembly is designed to be installed with a 2-stage furnace and is compatible with multiple systems

Specially designed and manufactured by Trane to fit Trane products

The evaporator coil indoors pulls the conditioned air into the home and distributes it throughout the house

If you are looking for a custom product or a product that is out of production please contact us

098, this inducer assembly will work to ensure your system’s efficiency