FIELD CHARGER ASSEMBLY
1-2004, with a minimum SEER of 11
It has a range of 45 F to 115 F and an accuracy of +/- 2
The Trane TDR0645 TRANSDUCER is a transducer used in measuring the temperature of air
TRANSDUCER - This device is used in the HVAC industry to measure the temperature of refrigerant, as well as other gasses with low conductivity
* So make sure you get it right the first time—with a Trane Transducer
The TDR0645 can be wired as either 2 stages with a common output or individually wired for 1 stage with two separate outputs
The Trane TDR0645 Transducer is designed for use with the following:
The Trane TDR0645 Transducer is used in certain air handlers to measure dew point temperature and humidity, and it has a 1/2 in NPT connection
The Trane TDR0645 Refrigerant Humidifier Transducer is used with a temperature-compensating probe to derive an air-side economizer or a free cooling valve position
Designed for comfort and convenience, the Trane TDR0645 transducer transmits temperature information from a remote outdoor sensor and displays it on a thermostat indoor receiver
Call us now to get tips on how to save money with this great product!
* A powerful addition to Trane's residential and light commercial cooling systems, the TDR0645 Transducer is the most accurate and reliable way to monitor refrigerant charge
Trane TDR0645 TRANSDUCER
The Trane TDR0645 TRANSDUCER is a 6-Inch by 5/16-Inch 1/8-Horsepower Resilient Mount Transducer (Part Number: 06730)
5
The Trane TDR0645 Transducer is a ready-to-install ductless package unit with a condenser and coil mounted on the exterior of your home
This allows for a direct connection to a BACnet network using either the Modbus or BACnet address
The Trane TDR0645 is a 6-inch diameter, 4-wire BACnet and Modbus compatible 2-stage, 2 position Transducer
This transducer is compatible with select Trane systems and should be installed by a qualified HVAC contractor
This system has been tested and certified to meet the efficiency requirements for Standard 90
A temperature sensor inside a metal case that measures and displays the measured parameter on an LCD screen