Trane COM11143 7.5TON 200/230-60-3 COMPRESSOR

7.5TON 200/230-60-3 COMPRESSOR

If the Control Board malfunctions, the air conditioning and heating systems will not operate properly and an error code will appear on the digital display

The Trane BRD3359 unprogrammed control board is designed for a wide range of Carrier, Bryant, Payne and Trane packaged rooftop air conditioners, heat pumps, and furnaces

It has one programmable and one non-programmable zone

Control Board for Trane model number BRD3359

The Control Board is responsible for all electrical functions in the air conditioner-heat pump

This board can be used with a variety of control types including conventional electronic scroll compressors, iris compressors, scroll compressors with expansion valves (TXV), scroll compressors only, or a combination of compressor types in one system

BRD3359 Unprogrammed Control Board

It is used in a variety of air conditioning and heating system configurations, including ducted, non-ducted, single stage, two stage and variable speed systems

It consists of a printed circuit board with a microprocessor and digital memory, solid state relays, and circuitry for control of airflow and temperature

Trane Unprogrammed Control Board BRD3359 for Air Conditioner/Heat Pump Unit

5 ton air conditioner, but it can also be used with other air conditioning units

The Trane BRD3359 Unprogrammed Control Board is used in both heating and cooling systems

Reprogramming is not necessary

The Trane Air Conditioner Control Board BRD3359 is designed to be used with the Trane 3

It is programmed for the most common air conditioning functions, so you can use it without programming it first

The Trane BRD3359 is a Control Board

The board also receives signals from the indoor air sensor, the outdoor air sensor, and the fan speed control

110 volt/60 hz/1 phase/unprogrammed

This Trane 13 SEER system is equipped with one of the following control boards: A0489765, A0489776, A0514113, A0514114, A0514116, or A0514117

The Trane BRD3359 Unprogrammed Control Board works with the following systems

The board operates at 230 volts and has a power consumption of 115 watts

The Unprogrammed Control Board is suitable for use in most climate control systems