Trane
Trane MOT14046 MOTOR
MOTORJust plug the controller into a wall outlet, connect it to your Wi-Fi network, download the free Trane app on your smartphone or tablet and you can start using the touchscreen anywhere in your...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountMOTOR
5 cfm/sq ft (0
But we’re getting ahead of ourselves
The switch has a maximum operating temperature of 112 degrees F (45 degrees C); requires an 8- to 24-VDC power supply; and has an amp draw of 1
This is the Trane SWT2281SPST Pressure Switch
The Trane SWT2281 is a pressure switch that senses low pressure at the evaporator coil and turns on the air handler blower when indoor coil airflow drops below 0
The pressure switch is designed to control the compressors in heating and cooling systems, and it can also be used to control condenser fans and humidifiers
It allows the DX unit to operate at a set point of 24
The Trane® SWT2281 is a single station, pressure switch that is designed for use in combination with the Trane® DX unit
This product can be used in mobile homes and light commercial applications
This pressure switch works with gas or oil-fired equipment and is compatible with systems up to 175 psi
This product requires a single pole 120 volt 15 amp breaker
The Trane SWT2281 is a high-quality pressure switch that can be used for a variety of applications
15 amps at 24 VDC
This switch has a 1/4" union connection
The Trane SWT2281 SPST Pressure Switch is designed to protect the equipment in a heat pump system against excessive pressure
The Trane SWT2281 SPST Pressure Switch-RV1 is designed for applications including furnaces, boilers, and heat pumps that require a reversing valve
Description: SPST pressure switch for AC/HP systems
1 inches w
It can also be used to protect a fan motor from overheating
1 m3/hr per sq m) of conditioned floor area
c
This product comes with an adjustable screw that allows the user to set the pre-charge amount, which determines when the devices will turn on or off
Trane SWT2281 SPST Pressure Switch
It has a “switch” in its name, but it also has an “actuator
For replacement or additional switch for 2-stage cooling systems
First, let’s talk about pressure switches!
2 amps at 12 VDC and 0
” When the pressure switch senses a drop in pressure, it “switches” and turns on the power to the heating and cooling system
Trane SWT2281 SPST Pressure Switch, for AC/HP Systems, 80-90VAC/70-100VDC
Item: Trane SWT2281 SPST Pressure Switch