Trane SWT3172 High Pressure Switch

High Pressure Switch

The company has been a Trane dealer in the United States for more than 70 years, with hundreds of thousands of products shipped annually throughout the country

This causes a drop in pressure within the system, which is sensed by the high-pressure switch and transmitted through a condenser fan relay to trigger compressor operation

It can accommodate a system up to 1,000 cu

The switch can be installed vertically or horizontally, and includes terminal screws for wire connection to power supply cables

Neuco Inc

ft

When refrigerant evaporates in the cooling coil, it absorbs heat and lowers its temperature

The high-pressure switch provides a signal to the unit's microprocessor that compressor operation is required

The Trane High Pressure Switch is designed to protect your air conditioner from damage that can occur from extended operation at low system pressures

This high pressure switch is designed for controlling units with variable speed pumps

The high-pressure switch should be replaced if defective or if any refrigerant leaks are found within its assembly or wiring connections

This high pressure switch is compatible with all Trane heat pumps, which includes the following models: Trane XE1000, XE2000, XR14000, XL18000 and XL24000

The TRANE® SWT3172 high pressure switch is an exact replacement for the following part numbers:

5A at 240VAC

The Trane SWT3172 high pressure switch is designed to control the compressor motor in a heat pump system

The SWT3172 incorporates a replacement high pressure switch for Trane air conditioners

Ideal for replacement and upgrade applications, it is compatible with all brands of heat pumps having single-stage compressors

This high pressure switch is designed for use with the Trane XR80 and XR90 air conditioners, part numbers 018-030-600, 053-030-600 and 018-030-600A

The Trane SWT3172 is a high pressure switch

The high pressure switch will turn off your air conditioner compressor and sound an alarm if the high pressure protection point is exceeded

is an official distributor of Trane, a leading manufacturer of heating, ventilation and engineering systems for residential and commercial customers

A high-pressure switch controls operation of the unit's compressor and other components, by sensing changes in pressure within the refrigeration system

It operates on a voltage range of 120-277V, and has a current rating of 0

The high pressure switch will shut off the pump if the water pressure falls below 105 PSI

This part requires a hole to be cut in the sheet metal, so it is not designed to be installed in pre-existing duct work systems