Trane VAL8179 4-Way Reversing Vlv.10 Ton

4-Way Reversing Vlv.10 Ton

A relief valve is a safety device used to limit the pressure of gases or liquids that may be contained in closed systems

The Relieve Valve is a crucial component of your HVAC systems air flow control and must be installed properly

When this occurs, refrigerant is directed from the evaporator coil to the outdoor coil by way of a line

They are essential for maintaining safe conditions inside heating equipment

This is a 2-way, normally closed, pilot type valve with an adjustable differential pressure setting of 6 to 15 inches wc with a maximum set pressure range of 22 to 30 PSI

Trane Relief Valves are used for heating, cooling and hydronic applications

The Trane 1/4 X 3/8" Relief Valve is used in the Trane air conditioning systems

The valve has been tested and listed by Underwriters Laboratories Inc (UL) and CSA International

Trane Relieve Valves are considered to be some of the best in the industry

The relief valve is used to protect a boiler or hot water heat exchanger from pressure or temperature extremes

A relief valve is not used to control flow of steam

The Trane VAL6940 "1/4 X 3/8"" RELIEF VALVE" is a 1/4 inch x 3/8-inch relief valve used in the Trane air conditioner

This model is used for domestic hot water applications

Trane relief valves are designed for residential humidified systems

The service pressure must be at least 2 pounds below the maximum permissible working pressure of the heater or boiler

They allow refrigerant to flow when the system is above low set point and the pressure within the evaporator coil rises to the relief pressure

VAL6940: 1/4" X 3/8" Relief Valve, 69psi Balanced Pressure, 150psi Relief Pressure, 10

The pressure setting must be adjusted properly in order to prevent overpressure and danger of explosion

Used in plumbing to regulate the flow of liquids and gases, relief valves reduce or stop the flow of water, steam or air through a pipe

Part Number: VAL6940

The control has a maximum temperature of 150 degrees F and comes with a 10 foot long capped lead wire

The Trane VAL6940 "1/4 X 3/8"" RELIEF VALVE" is a product engineered to provide you with trusted performance and efficiency while keeping your family comfortable

These products are replacement parts for air conditioning and heating systems manufactured by Trane

The relief valve fits into a back seat kit, which is located between the outdoor condenser and indoor evaporator