Trerice PTC14405 Bottom Stem Tridicator, 1/2" NPT Connection, 3" face, 30-250°F/C & 0-200 PSI/KPA

TRIDICATOR 30/240deg 0/200psi

Three ranges in one measurement device - accurately measures pressures from 30 to 240psi, and temperatures from 0 to 200degF/C. Portable PSI-only or temperature-only devices have long been used for a variety of applications like servicing aircraft hydraulics, constructing pipelines and water well drilling, and calibrating gauges on pressure vessels. The Tridicator makes this device convenient enough for the weekend warrior mechanic.

Designed for a single point calibration, the 30-250F/C TRIDICATOR is designed for calibrating low pressure instruments such as thermocouples and manometers. Simply connect a thermowell (available separately) to either port, then open or close the valve in order to calibrate directly at the desired temperature. When set up in this configuration, the output pressure is automatically zeroed at the ambient temperature of 30°C/86°F. The 30-250F/C TRIDICATOR is ideal for use in temperatures ranging from greater than –20°C/-4°F and above

Use the TRIDICATOR to measure flow, density, specific gravity and percent solids of liquids. Used for bench top and in vessel applications. The open face bottom stem design of the TRIDICATOR allows the user to place a glass container under the valve head.

PTC cylinders provide increased strength during fast assembly and disassembly. TRIDICATOR is a pressure-tridicator connector, which allows an inverted cylinder to be connected to a vertical pipe. Its stainless steel design provides for corrosion resistance when used with water, acid or gas. PTC Cylinders are leak-free when disconnected due to positive shell sealing and a built-in bonnet seal.

The TRIDICATOR® PH instrument provides a direct measurement of the true boiling point. The high degree of accuracy is obtained by the innovative single sensor (TRIDICATOR 30) or dual sensors (TRIDICATOR SWITCH™) using patented technology.

The Tridicator Bottom Stem Tridicator is a unique thermocouple/pressure transducer designed to drop into an existing process line. The gauge is temperature compensated to eliminate offset error caused by varying length of the thermocouple. The motorized valve has a built-in spring closure and provides positive seal with all types of stoppers and fittings.

The Tridicator combines a thermometer with a pressure gauge to simplify both temperature and pressure measurement in demanding applications.