United Electric J21K-232 SPDT 0-25# NEMA 4 Diff. # Sw. SPDT 0-25# NEMA 4 Diff. # Sw.

SPDT 0-25# NEMA 4 Diff. # Sw.

The United J21K-232 SPDT 0-25# NEMA 4 Diff. # Sw. is a 2 pole heavy duty switch with 25A resistive/inductive, and 1 pole N.O./N.C. contacts in a NEMA 4X rating, 250VAC/125VDC. SPDT auto-operated - Momentary changeover

The J21K-232 SPDT 0-25# NEMA 4 Differential Switch is a single pole, double throw switch in the SPDT (Single Pole Double Throw) configuration. It has 2 contacts on the common (C) terminal and 3 contacts on the normally open terminal (NO.) The differential coil is 10? long with a 2.00? throw that operates a 3/8? blade type snap action switch. The body style of this switc

The J21K-232 SPDT is a double throw, single pole, triple throw circuit breaker with 0-25 A switching and a maximum trip current of 25 A. This 100% rated circuit breaker is UL, CSA, VDE, IEC/EN 60898-1 approved.

These heavy-duty differential relays, designed for general use on 110/120, 208/240, or 277 VAC systems, has No. 4 contacts with 0-25 volt coil voltage. Silver alloy in contact springs for 50,000 operations max at full load gives continuous positive action and maintains resistance to corrosive environments.

Power your next project with this NEMA 4/IP65 weatherproof 15 amp, 240 volt SPDT toggle switch. It features an operating temperature range of -20 to 70 degrees Celsius and is protected against short circuit and overload by built-in resettable circuit breakers. The additional locking position provides for increased safety during use outdoors or in wet locations.

The J21K-232 2 position 25A SPDT switch is a normally closed, single pole double throw switch. It can operate with 110V and can handle up to 25 Amps.

When connected to one another, these SPDT switches provide a controlled path for reversing an electrical current. The contacts are rated for 600V switching capacity and can handle 10A of continuous current. The normally open (NO) contacts are rated for 3/4HP. The normally closed (NC) contacts are rated for 1/2HP. #NEMA4X-D or #NEMA1X-D enclosure compatible