"PACKING KIT FOR 5/16"" STEM"
The JOHNSON CONTROLS V-5460-602 PACKING KIT FOR 5/16"" STEM has a durable long-lasting construction and is washer and dryer safe for your convenience. With the kit's design, you can adjust how much stem you want inside the packing gland to meet your seal requirements.
A PACKING KIT FOR 5/16"" STEM. FOR USE WITH FOOT CONTROLS V-5460 AND V-5450. INCLUDES STEM AND HOUSING, BUSHINGS AND CLEANER.
V-5460-602 Packaging Kit for 5/16"" StemIncludes valve stem, packing nut, stem washer and lock washer.
ORNAMENTAL BACK TO BACK VALVE WITH SPRING RETURN INTAKE, TWO 3/4" PORTS FOR PACKING 5/16"" STEM "
A stem packing kit to fit 5/16"" stem valves. - Includes: 1) 1/4"" S.S. Washer, 2) Packing Washer-Nut, 3) Packing Nut, and 4) Packing Bolt Nail
This stem packing kit is used to grease the stem threads on valves that have a 5/16"" stem size. It includes an inner o-ring and an outer protective sleeve. The kit is specifically designed for use with Johnson Controls' Series E and Series F packing valves.
Turn your 18mm ball joint stem into a universal bar for packing by threading it into this adaptor. Use with a pipe tool to clean packing or remove a piston from its bore. Compatible with all 5/16"" stems. Kit includes adaptor, socket wrench and packing pick.
JBJ Packing Kits include all the items you need to properly install your aquarium's lighting system. Each kit includes stem, nut, gasket, jam nut, packing, and instructions. Available in 7/16"" or 5/16"" stems, the JBJ Packing Kits are 100% aquarium safe and will help make fish-keeping enjoyable for years to come.
Our packer kits are a great choice for a value-priced, quality supply of packing stems. The stems are a high quality at a low price. Our packer kits contain two 5/16"" x 24 stems and one 3/8"" x 24 stem.
This is a packing kit for a model V-5460-602. This kit is made of nylon and contains a stem, tube cup, and an assembly manual.
A packing tool that can save your stem and still give you a good pack. The ends of the packing tool far enough back to allow it to be used on stems that have been rubbed down. On new stems it will allow you to pack the bowl deeply and protect the rubber by avoiding contact with the stem. It is an innovative 3-piece design so it can be broken down and stored in your tool box.
The Johnson Controls V-5460-602 stem packing kit is suitable for cross stem valves. The kit contains a metering stem, a knob, a cup, and a cone seat.
Free Shipping
In stock
