JOHNSON CONTROLS V-9502-15 V-9502-15 POSITIONER FOR V-3000 ACTUATORS

POSITIONER FOR V-3000 ACTUATORS

The V-9502-15 is a positioner and drive system for Johnson Controls V-3000 actuators.

POSITIONER FOR V-3000 ACTUATORS

The Johnson Controls V-9502-15 POSITIONER FOR V-3000 ACTUATORS is a rugged, all-steel mechanical positioner designed for dependable operation in harsh environments. The V-9502-15 replaces the POSITIONER FOR V 1000 & 2000 ACTUATORS. The positioner provides simple, accurate positioning of a pneumatic or hydraulic valve actuator up to 1,000 amp at 125 volts. The unit can be mounted vertically on a panel or horizontally on a rack.

Used on Johnson Controls V-3000 actuators, this positioner controls the position of a valve or other equipment. Because it is compact and durable, it does not require a mounting box. It can be set up to monitor up to 12 positions.

The V-9502-15 POSITIONER FOR V-3000 ACTUATORS is the replacement positioner for Johnson Controls (JCI) V-3000 actuators. It controls the position of the door by sensing and compensating for temperature changes. It is suggested to be used with a controller that has an external feedback loop on the coil winding. The positioner should be installed in a dry environment and mounted to a flat surface, directly below and parallel to close-coupled JCI actuators.

The V-9502-15 Positioner for V-3000 Actuators from Johnson Controls is a positioner for V3000 actuators that is rated at 15 amps and 24Vdc.

The V-9502 series positioner is a member of the Johnson Controls line of SpacePlus positioners. The V-9502 series is designed to position valves with outputs that range from 0.75 to 10 inH2O (0.1 to 1.5 bar) and can be ordered with up to eight limit switches. Limit switches can be ordered individually or as part of the positioner, depending on the application's needs.

The Johnson Controls V9502-15 is a positioner for V3000 actuators. It was engineered to reduce motor carbon brushes wear and extend motor life. This is a highly sophisticated, high performance positioner well suited for precision positioning applications. It also provides enhanced motion control by incorporating velocity, acceleration and position feedback sensors along with closed loop current control for smooth operation and speed control. The positioners are designed to provide high performance, high availability and low cost of ownership in harsh environments.

The V9502-15 is a simple and easy to use positioner for use with Johnson Controls' V3000 family of heavy duty actuators. The positioner provides totally proportional control, high accuracy, and long life in an economical package.