Honeywell 68106 , Inc. 3 inch Solenoid Gas Valve, 6100 CFH

"3""N/C 120V SOL.VLV

The Honeywell 68106 3""N/C 120V SOL.VLV Gas Valve is designed for residential and commercial natural gas and propane systems to help ensure a consistent amount of gas is flowing into your appliances. This gas valve allows installation on either vertical or horizontal piping, and it has either an NPT or BWB threaded outlet. The Honeywell 68106 comes complete with an internal solenoid that allows operation in either the normally open or normally closed positions.

Solenoid valve, 3""N/C 120V. Max pressure: 6100 CFH. Gas connection: 1/2"" MNPT male. Material(s) of construction: Both sections steel, zinc plated; ball & seat brass or bronze. Seal material: EPDM pre-packaged w/nonmetallic sleeve. Reeds & contacts copper clad steel. Actuator electric terminal - NEMA-14A terminal box rated 600 VAC, 2 HP maximum, 4A maximum Wiring diagram available under Documents ""Documents"".

The Honeywell 68106 / 6100 is normally closed, pilot operated gas valve. This valve features a 3"" N/C port to accommodate up to 6"" pipe connections. It can be installed in a remote location using the included 24"" lead wire with alligator clips. This 3"" Solenoid Valve has a threaded brass bonnet and metal internals.

The Honeywell 68106 is a solenoid valve that fits a 3"" NPS size. This high volume gas control valve flows 6100 CFH and has a voltage of 120V. It stands 17" tall by 10" wide with an inlet diameter of 3"" and an outlet diameter of 1/4" which connects to the regulator on your BBQ grill or smoker. This item is ideal for home installations where large amounts of gas will be used, and can be used with liquid propane.

Honeywell 3"" Solenoid Gas Valve, 6100 CFH — Get reliable performance and exceptional durability from this solenoid valve that can easily meet the needs of your business. 68106.0001 works with gas lines using natural gas at low pressures. It can handle commercial water heaters, hot water boilers, warm air furnaces and other appliances. This item includes a 3"" inlet and outlet and has a maximum pressure of 160 psi (11 bar), a minimum pressure of 0 psi (0 bar), and a flow rate of 6100 CFH (859 m3/hr).

The Honeywell 68106 solenoid valve is designed with industrial gas users in mind. This valve has a 3"" discharge port, 6100 cfh, and 12V DC supply voltage. It is constructed with bronze and stainless steel to reduce corrosion issues, as well as a PTFE seat and diaphragm to ensure smooth operation.

The Honeywell 6100 CFM Gas Outside Vent Solenoid Valve Bypasses fumes, vapors, and moisture away from the building to prevent water damage. Designed with a special 303 stainless steel stem and body that's corrosion resistant for year after year of use. Easy to program and install with a wall, surface or duct mountable design."