Johnson Controls 9512 3/4" TEMPERATURE ACTUATED REGULATIN

3/4" TEMPERATURE ACTUATED REGULATIN

Johnson Controls 9512 3/4" TEMPERATURE ACTUATED REGULATIN The Johnson Controls 9512 1/2" and 3/4" Temperature Actuated Regulating Valve is for use with refrigerant lines, R-22. This product is intended for use with pneumatic temperature control systems and it can be used to control capacity or temperature of a refrigerant line. It operates directly on the ground and has a temperature range of -60 degrees F to 265 degrees F. Those looking for Johnson Controls 9512 1/2" and 3/4" Temperature Actuated Regulating Valve should also

In industrial process chillers using chilled water for cooling, temperature-sensitive valves are used to prevent freezing in cold weather and to keep inlet temperatures above a certain point when the ambient temperature is warm. The Johnson Controls 9512 is a 3/4" TEMPERATURE ACTUATED REGULATOR that will insure against freezing in cold weather and to hold the cold load temperature above a certain point in warm weather. In industrial processes where exacting controls are required, the 9512 should be employed.

The Johnson Controls 9512 3/4 inch Temperature Actuated Regulating Valve is designed for gas fired decorative vented home heating appliances. It can be used on vented decorative fireplaces, gas logs, fire tables, vents and stoves subject to actual installation requirements.

Regulating temperature with a thermostat is an easy way to save money and energy. Johnson Controls' 3/4" Thermostatic Shunt Device (TSD) allows you to fine tune your temperature. With this low-pressure, compact unit you can control temperatures as low as 25°F and as high as 155°F.

The 9512 Series Temperature Actuated Control from Johnson Controls is a non programmable, solid state, single stage actuator with safety trip mechanism activated by a sensing element. With a variety of mounting options and safety interlock for remote air and electric devices, the 9512 will provide years of trouble free performance.

This thermostat is used in homes or buildings that are not branched for heat, heat pumps, and units requiring an individual room thermostat. The Johnson Controls 9512 3/4" Room Thermostat has a 1/4" x 3/4" terminal board, giving it the ability to handle multiple wires for installation convenience.

Self-regulating - activation temperature is determined by the surface temperature to which the control box is exposed...Set it and forget it. No manual adjustments or resetting required.

The 9512 three-way solenoid valve is a spring return, normally closed, normally open with a common port designed to control flow of liquids and gases.

The Johnson Controls 9512 line voltage thermostat combines the reliability and durability of a tried and true electronic 24 VDC thermostat with soft switching to protect the compressor from premature failure. On/off defrost control for improved efficiency, 95°F set point, and a programmable option for up to 2 customer selected time periods that will shut down your system during those times when energy is not needed or when it's in draft. Durable stainless steel construction for a trouble-free performance.

The 9512 is the only Johnson Controls bathroom fan in its class to offer three in one ventilation management. It can provide up to 80 CFM of fresh air in your bathrooms, while still maintaining consistent airflow velocity in the supply duct. The 9512 is an ideal solution for retrofitting exiting installation to meet updated codes and/or zoning requirements or complying with building-wide energy codes.

The 9512 temperature actuator is a hard wired, solid state control that senses temperature and implements a proportional control loop. This control is ideal for heating and air conditioning systems in single zone applications where a space thermostat cannot be used. The Johnson Controls 9512 temperature actuator can be used to achieve energy savings by switching off a system when ambient temperature drops below a programmable setpoint.