120V 1-1/4" DIAPHRAGM GAS VALVE 1/2
The V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 ` is an electric (120 VAC) diaphragm gas valve for air conditioning and heat pump applications. It can be used as a zone valve, system shutoff, main burner valve, or relief valve. It has a maximum pressure of 130 PSIG at 750F and an operating temperature range of 0 to 248.0F (-18 to 120C).
Honeywell V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 - 2 FLUTE CNC MILL The Honeywell V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 is a component in the gas control system of your HVAC. This gas valve is used in an application where low pressure gas must be turned off and shutoff quickly. The Honeywell V
V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 This diaphragm gas valve switch is designed for installation into the field of natural gas supplies. It is normally open with a pilot operating pressure of 2.5 psi to 90 psi (0.17 to 6.2 bar).
HONEYWELL V48A2177 V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 CONTACTOR/CONTROLLER, DROP IN REPLACEMENT FOR OLDER STYLE #977
HONEYWELL V48A2177 V48A2177 120V 1-1/4" DIAPHRAGM GAS VALVE 1/2 *** Features This valve is a two piece design with an adjustable needle seat that prevents serious injury if the valve is incorrectly adjusted, as well as an integral heat shield/bracket so it only occupies one position on the manifold. Construction Versatile design for use in a variety of HVACR applications to control Modular Space Heating
The HONEYWELL (V48A2177 V48A2177) 120V 1-1/4" DIAPHRAGM GAS VALVE is made of die-cast brass body and bonnet with tri-metal seat. Vacuum-tested for a leakproof seal and durable ignition coil that is designed to last the lifetime of your range. The quick connect inlet features a compressed metal gasket for gas tightness, and the flange outlets are tapped with 1/
The V48A2177 1-1/4" diaphragm gas valve is a single valve with balance-in, bleed. It is used on natural gas, propane and other similar gases.