Honeywell 36201 ACTUATOR MP953C 1018 PNEUMATIC 1 IN NPT GLOBE VALVE B342316

1" STEAM/H20 VALVE SCREWED 11.7 CV

The 36201-MP953C-1018 Series plant air valves are direct acting, single port pneumatic valves that control the flow of steam or hot water to a process line. The valves are threaded 11.7 CV and have a B342316 actuator. These pneumatic steam or hot water valves provide fast cycle times with good control accuracy, and are available in a wide range of NPT body sizes (1/4", 3/8", 1/2", and 3/4") and pipe connections (NPT and NPS). Valves up to DN125 are available with a factory

The B-Series valves offer larger bodies for increased steam flows with a ¾" manual and 11.7 CV actuation effort. The B-Series valves are available in a straight pattern, full port or pilot operated with plug positions of 0", 15°, 45° or 60°. Valves with 1/8" NPT ports can be utilized for pressure relief applications. These valves are also self contained limiting the need to add accessory support bracket when utilizing the 3/4" NC solenoid option.

"STEAM/H2O - LOÂ O

The Pneumatic Control Valve Series 953C, B342316 is a fractional inch globe valve designed for use in low pressure and low steam-pressure applications. It is ideally suited for process applications where control accuracy of flow is not critical. The NPT threaded connections make it easy to install. This type of valve offers long life and requires low maintenance. The actuator uses 1/4" supply air and 3/4" discharge air inlet connections with a standard left hand actuator lead wire input, is good for 0.50 to 60 PSI steam service, and has an 11.7 cubic

The Honeywell 36C1018P is a 1.0" steam and water globe control valve with manual operation screw type. The actuator has 41/32-24 threads for connection.

Steam and hot water control valves are referred to as: "ON-OFF" valves. Steam actuated valve for general service applications where temperature and pressure relief are not critical. Steam products are designed in accordance with ASME B16.34 & B16.5 consensus standards and applicable codes.

Leaving water in a hot water-heated commercial steam room or steam table for any length of time could cause the temperature of the water to drop below the recommended holding temperature. The Honeywell valve is a spring-loaded flapper-type valve designed to provide a positive shut off and precise flow control. The automatic drain reduces the risk of overflow when drain lines are running at full capacity for unusually long periods of time. The plug is magnetic so it won't get lost when it's removed. This globe valve also features brass construction for reliability and ease of cleaning, and easy installation with plug and play capability requiring no additional